Hi,
Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> writes:
> Currently the driver depends on the bootloader to enable the clocks.
> Add support for clocking. The patch enables the clock at probe and
> disables them at remove.
>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
> ---
> drivers/usb/gadget/udc/udc-xilinx.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
> index fb4ffedd6f0d..30070a488c87 100644
> --- a/drivers/usb/gadget/udc/udc-xilinx.c
> +++ b/drivers/usb/gadget/udc/udc-xilinx.c
> @@ -11,6 +11,7 @@
> * USB peripheral controller (at91_udc.c).
> */
>
> +#include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/dma-mapping.h>
> @@ -171,6 +172,7 @@ struct xusb_ep {
> * @addr: the usb device base address
> * @lock: instance of spinlock
> * @dma_enabled: flag indicating whether the dma is included in the system
> + * @clk: pointer to struct clk
> * @read_fn: function pointer to read device registers
> * @write_fn: function pointer to write to device registers
> */
> @@ -188,6 +190,7 @@ struct xusb_udc {
> void __iomem *addr;
> spinlock_t lock;
> bool dma_enabled;
> + struct clk *clk;
>
> unsigned int (*read_fn)(void __iomem *);
> void (*write_fn)(void __iomem *, u32, u32);
> @@ -2092,6 +2095,26 @@ static int xudc_probe(struct platform_device *pdev)
> udc->gadget.ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO].ep_usb;
> udc->gadget.name = driver_name;
>
> + udc->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
> + if (IS_ERR(udc->clk)) {
might be a way idea to add a dev_warn() here in case you get
ENOENT. This should let people that DTS has to be updated accordingly.
--
balbi
