Shantur Rathore wrote: > Hi Thinh, Hi Shantur, please don't do top-post. > > Thanks for replying. > > As per the documentation for RK3399, it says > > USB3.0 Device Features > Up to 7 IN endpoints, including control endpoint 0 > Up to 6 OUT endpoints, including control endpoint 0 > The statements above are not accurate. You can have more OUT endpoints, but if you assign all 7 endpoints as IN, then you have up to 6 endpoints left for OUT. The dwc3 controller is flexible and you can have various configurations. > In this case, I think the hardware defines the endpoints being in / out. > I am in no case a dwc3 expert or have DWC3 documentation so cannot say > for certain. > It is all based on RK3399 documentation. > > I am trying to use a composite gadget with > > - HID Keyboard - 1 IN > - HID Mouse - 1 IN > - NCM - 2 IN and 1 OUT > - 2 Mass Storage Devices - 2 IN and 2 OUT Why do you need 2 Mass Storage devices? Can you use 2 LUNs instead? > > That including ep0 totals to 7 IN endpoints and 3 Out endpoints. > >> Currently, dwc3 driver assumes that DWC3_NUM_IN_EPS(params) is at least >> half of DWC3_NUM_EPS(parms). If that's not the case, we may see >> problems. To cover most application setup, the driver tries to setup >> number of OUT = IN. > > I think I am seeing this issue when I try to use the last IN endpoint. > > Can you please let me know the direction I should take? > At the moment, I don't have a good/clean solution for this. dwc3 setups half IN and half OUT from the total number of endpoints ahead of time. Without the full context of the configuration from the composite layer, it can't adjust easily. Maybe others have some ideas. BR, Thinh > > On Fri, Sep 10, 2021 at 12:43 AM Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> > wrote: > >> Shantur Rathore wrote: >>> In RK3399 as per documentation ( >>> >> https://urldefense.com/v3/__https://usermanual.wiki/Document/RockchipDeveloperGuidelinux44USB.31610806__;!!A4F2R9G_pg!JqYr6U87SL3rYylirF6W2vwNzC0Ft8YiZwTlMTwWl7bpaHGZuh-JMfOvUaG781GKZIBd$ >>> ), there are 7 Input Endpoints and 6 Output endpoints, in total 13 >>> endpoints. >>> >>> Currently dwc3/gadget.c driver uses the number of endpoints >>> available and starts setting them up with even endpoints as output >>> endpoints and odd numbered as even endpoints. This leads to 7 Output >>> endpoints and 6 input endpoints for RK3399. >>> >>> If you try to create a composite gadget which uses all the input >>> endpoints, one can see the issue. You just need to create functions to >>> use up the last input ep and it would fail to create. No need to >>> connect it to the host. >>> This was confirmed when running a rockchip-linux bsp image. >>> >>> [root@rockpro rock]# ls /sys/kernel/debug/usb/fe800000.usb/ >>> ep0in ep0out ep1in ep1out ep2in ep2out ep3in ep3out ep4in >>> ep4out ep5in ep5out ep6in link_state lsp_dump mode regdump >>> testmode >>> >>> Currently in linux mainline it is >>> >>> [root@rockpro rock]# ls /sys/kernel/debug/usb/fe800000.usb/ >>> ep0in ep0out ep1in ep1out ep2in ep2out ep3in ep3out ep4in >>> ep4out ep5in ep5out ep6out link_state lsp_dump mode regdump >>> testmode >>> >>> ep6 being out instead of in as per the hardware spec. >>> >>> Upon investigation of rockchip bsp kernel, >>> >> https://urldefense.com/v3/__https://github.com/rockchip-linux/kernel/__;!!A4F2R9G_pg!JqYr6U87SL3rYylirF6W2vwNzC0Ft8YiZwTlMTwWl7bpaHGZuh-JMfOvUaG788DHJSUE$ >>> >>> The issue was clear, currently, dwc3/gadget driver doesn't take >>> DWC3_NUM_IN_EPS into consideration while enumerating them. >>> >>> The patch below fixes the issue and ep6 is correctly enumerated as input. >> >> No Signed-of-by? >> >>> --- >>> drivers/usb/dwc3/core.c | 1 + >>> drivers/usb/dwc3/core.h | 1 + >>> drivers/usb/dwc3/gadget.c | 40 ++++++++++++++++++++++++--------------- >>> 3 files changed, 27 insertions(+), 15 deletions(-) >>> >>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c >>> index 01866dcb953b..279c9a97cb8c 100644 >>> --- a/drivers/usb/dwc3/core.c >>> +++ b/drivers/usb/dwc3/core.c >>> @@ -555,6 +555,7 @@ static void dwc3_core_num_eps(struct dwc3 *dwc) >>> struct dwc3_hwparams *parms = &dwc->hwparams; >>> >>> dwc->num_eps = DWC3_NUM_EPS(parms); >>> + dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); >>> } >>> >>> static void dwc3_cache_hwparams(struct dwc3 *dwc) >>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h >>> index 5612bfdf37da..89a0998c618c 100644 >>> --- a/drivers/usb/dwc3/core.h >>> +++ b/drivers/usb/dwc3/core.h >>> @@ -1227,6 +1227,7 @@ struct dwc3 { >>> u8 speed; >>> >>> u8 num_eps; >>> + u8 num_in_eps; >>> >>> struct dwc3_hwparams hwparams; >>> struct debugfs_regset32 *regset; >>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c >>> index 804b50548163..d9d19dc0a29f 100644 >>> --- a/drivers/usb/dwc3/gadget.c >>> +++ b/drivers/usb/dwc3/gadget.c >>> @@ -693,9 +693,11 @@ void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc) >>> >>> dwc->last_fifo_depth = fifo_depth; >>> /* Clear existing TXFIFO for all IN eps except ep0 */ >>> - for (num = 3; num < min_t(int, dwc->num_eps, DWC3_ENDPOINTS_NUM); >>> - num += 2) { >>> + for (num = 3; num < DWC3_ENDPOINTS_NUM; num += 2) { >>> dep = dwc->eps[num]; >>> + >>> + if(!dep) >>> + continue; >>> /* Don't change TXFRAMNUM on usb31 version */ >>> size = DWC3_IP_IS(DWC3) ? 0 : >>> dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1)) & >>> @@ -2257,7 +2259,7 @@ static void dwc3_stop_active_transfers(struct dwc3 >> *dwc) >>> { >>> u32 epnum; >>> >>> - for (epnum = 2; epnum < dwc->num_eps; epnum++) { >>> + for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { >>> struct dwc3_ep *dep; >>> >>> dep = dwc->eps[epnum]; >>> @@ -2960,10 +2962,9 @@ static int dwc3_gadget_init_out_endpoint(struct >> dwc3_ep *dep) >>> return dwc3_alloc_trb_pool(dep); >>> } >>> >>> -static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) >>> +static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum, bool >> direction) >>> { >>> struct dwc3_ep *dep; >>> - bool direction = epnum & 1; >>> int ret; >>> u8 num = epnum >> 1; >>> >>> @@ -3011,21 +3012,30 @@ static int dwc3_gadget_init_endpoint(struct dwc3 >> *dwc, u8 epnum) >>> return 0; >>> } >>> >>> -static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total) >>> +static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total, u8 >> num_in_eps) >>> { >>> - u8 epnum; >>> + u8 num; >>> + int ret; >>> >>> INIT_LIST_HEAD(&dwc->gadget->ep_list); >>> >>> - for (epnum = 0; epnum < total; epnum++) { >>> - int ret; >>> + /* init input endpoints as reported by hw */ >>> + for (num = 0; num < num_in_eps; num++) { >>> >>> - ret = dwc3_gadget_init_endpoint(dwc, epnum); >>> - if (ret) >>> - return ret; >>> - } >>> + ret = dwc3_gadget_init_endpoint(dwc, (num << 1) + 1, 1); >>> + if (ret) >>> + return ret; >>> + } >>> >>> - return 0; >>> + /* init rest endpoints as output endpoints */ >>> + for (num = 0; num < total - num_in_eps; num++) { >>> + >>> + ret = dwc3_gadget_init_endpoint(dwc, num << 1, 0); >>> + if (ret) >>> + return ret; >>> + } >>> + >>> + return ret; >>> } >>> >> >> * DWC3_NUM_EPS(parms) is the total number of endpoints configured in HW >> * DWC3_NUM_IN_EPS(parms) is the max number of IN endpoints that SW may >> configure >> >> The number of OUT endpoints does not mean DWC3_NUM_EPS(parms) - >> DWC3_NUM_IN_EPS(parms). >> >> As long as physical endpoint 0 and 1 are dedicated for control endpoint, >> other endpoints can be assigned as IN or OUT direction. So, you can have >> as many as DWC3_NUM_EPS(parms) - 1 number of OUT endpoints. >> >> Currently, dwc3 driver assumes that DWC3_NUM_IN_EPS(params) is at least >> half of DWC3_NUM_EPS(parms). If that's not the case, we may see >> problems. To cover most application setup, the driver tries to setup >> number of OUT = IN. >> >> For your case, is there an application that needs all >> DWC3_NUM_IN_EPS(params)? If you're going to make a change, please keep >> in mind of the info above to prevent regression. >> >> Thanks, >> Thinh >> >
