Hi Ulrich,
On Sun, Aug 29, 2021 at 01:02:54PM +0200, Ulrich Huber wrote:
>
> On 28.08.21 11:48, Heikki Krogerus wrote:
> > On Thu, Aug 26, 2021 at 09:50:58PM +0200, Ulrich Huber wrote:
> > > I just got around to test your patches. They seem to solve the issue
> > > completely! Whatever I tried, the behavior of the port stayed consistent and
> > > no error messages appeared in the log.
> > >
> > > I'll continue using the patch for now and will notify you, should any issue
> > > appear.
> > Great! If there are no problems, I'll send them to Greg after the next
> > -rc1.
>
> It seems I just found one such problem. After waking from hibernation I get
> the following entries in the kernel log:
>
> Aug 29 11:55:31 lenovo-ulrich kernel: ucsi_acpi USBC000:00:
> GET_CONNECTOR_STATUS failed (-5)
> Aug 29 11:55:31 lenovo-ulrich kernel: ucsi_acpi USBC000:00:
> GET_CONNECTOR_STATUS failed (-5)
> Aug 29 11:55:31 lenovo-ulrich kernel: usb 3-6: reset high-speed USB device
> number 3 using xhci_hcd
> Aug 29 11:55:31 lenovo-ulrich kernel: ish-hid
> {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_do>
> Aug 29 11:55:31 lenovo-ulrich kernel: usb 3-10: reset full-speed USB device
> number 4 using xhci_hcd
> Aug 29 11:55:31 lenovo-ulrich kernel: usb 3-5: reset full-speed USB device
> number 2 using xhci_hcd
>
> It is obviously related with the system resetting the hardware after waking
> up. Most likely the driver tries to communicate with the device while it is
> in a state where it is not able to respond. I do not get this after each
> hibernation, so far it is the first time I have seen this. I'll try to find
> a way to reproduce this.
Any updates?
Would it make sense to go ahead with my series now anyway at this
point since it seems to fix the other problems?
thanks,
--
heikki
