[RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During a USB cable disconnect, or soft disconnect scenario, a pending
SETUP transaction may not be completed, leading to the following
error:

    dwc3 a600000.dwc3: timed out waiting for SETUP phase

If this occurs, then the entire pullup disable routine is skipped and
proper cleanup and halting of the controller does not complete.
Instead of returning an error (which is ignored from the UDC
perspective), do what is mentioned in the comments and force the
transaction to complete and put the ep0state back to the SETUP phase.

Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
---
 drivers/usb/dwc3/ep0.c    | 4 ++--
 drivers/usb/dwc3/gadget.c | 6 +++++-
 drivers/usb/dwc3/gadget.h | 3 +++
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 6587394..abfc42b 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -218,7 +218,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 	return ret;
 }
 
-static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
+void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 {
 	struct dwc3_ep		*dep;
 
@@ -1073,7 +1073,7 @@ void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
 	__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
 }
 
-static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
+void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 	u32			cmd;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 54c5a08..a0e2e4d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2437,7 +2437,11 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
 		if (ret == 0) {
 			dev_err(dwc->dev, "timed out waiting for SETUP phase\n");
-			return -ETIMEDOUT;
+			spin_lock_irqsave(&dwc->lock, flags);
+			dwc3_ep0_end_control_data(dwc, dwc->eps[0]);
+			dwc3_ep0_end_control_data(dwc, dwc->eps[1]);
+			dwc3_ep0_stall_and_restart(dwc);
+			spin_unlock_irqrestore(&dwc->lock, flags);
 		}
 	}
 
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 77df4b6..632f7b7 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -114,6 +114,9 @@ int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		gfp_t gfp_flags);
+void dwc3_ep0_stall_and_restart(struct dwc3 *dwc);
+void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep);
+
 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
 void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux