Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.
Here is usb-devices and lsusb -v output of this device:
> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
> D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
> P: Vendor=2cb7 ProdID=010b Rev=04.14
> S: Manufacturer=Fibocom
> S: Product=Fibocom Modem_SN:XXXXXXXX
> S: SerialNumber=XXXXXXXX
> C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.20
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x2cb7 Fibocom
> idProduct 0x010b
> bcdDevice 4.14
> iManufacturer 1 Fibocom
> iProduct 2 Fibocom Modem_SN:XXXXXXXX
> iSerial 3 XXXXXXXX
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 0x00e6
> bNumInterfaces 5
> bConfigurationValue 1
> iConfiguration 4 RNDIS_DUN_DIAG_ADB
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 896mA
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 0
> bInterfaceCount 2
> bFunctionClass 239 Miscellaneous Device
> bFunctionSubClass 4
> bFunctionProtocol 1
> iFunction 7 RNDIS
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 239 Miscellaneous Device
> bInterfaceSubClass 4
> bInterfaceProtocol 1
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 01
> ** UNRECOGNIZED: 04 24 02 00
> ** UNRECOGNIZED: 05 24 06 00 01
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 9
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 10 CDC Data
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x8e EP 14 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 6
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x0f EP 15 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 6
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 00
> ** UNRECOGNIZED: 04 24 02 02
> ** UNRECOGNIZED: 05 24 06 00 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x000a 1x 10 bytes
> bInterval 9
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 48
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 4
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 66
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 0x0016
> bNumDeviceCaps 2
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000006
> BESL Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000f
> Device can operate at Low Speed (1Mbps)
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 1 micro seconds
> bU2DevExitLat 500 micro seconds
> Device Status: 0x0000
> (Bus Powered)
It looks like this patch:
accf227de4d2 ("USB: serial: option: Add support for Quectel RM500Q"),
so I copied that patch and replaced VID/PID with FG150, rebuild kernel,
and it works well.
PS:
In Fibocom's Windows driver, they hardcoded USB interface, which
looks like:
> I: If#=0x0 --> Remote NDIS Compatible Device
> I: If#=0x1
> I: If#=0x2 --> Fibocom USB Modem // Modem
> I: If#=0x3 --> Fibocom USB Diagnostics (COMx)
> I: If#=0x4 --> Fibocom Modem_SN:XXXXXXXX //WinUSB, ADB
Signed-off-by: Zhengjun Zhang <zhangzhengjun@xxxxxxxxxxx>
---
drivers/usb/serial/option.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 0fbe253dc..0e964cb13 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -563,6 +563,9 @@ static void option_instat_callback(struct urb *urb);
#define WETELECOM_PRODUCT_6802 0x6802
#define WETELECOM_PRODUCT_WMD300 0x6803
+/* Fibocom products */
+#define FIBOCOM_VENDOR_ID 0x2cb7
+#define FIBOCOM_PRODUCT_FG150 0x010b
/* Device flags */
@@ -2077,6 +2080,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */
+ { USB_DEVICE_AND_INTERFACE_INFO(FIBOCOM_VENDOR_ID, FIBOCOM_PRODUCT_FG150, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(FIBOCOM_VENDOR_ID, FIBOCOM_PRODUCT_FG150, 0xff, 0, 0) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
--
2.32.0
