On Fri, May 14, 2021 at 10:26:13PM -0700, Badhri Jagan Sridharan wrote: > APPLY RC is defined as ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2 and > POWER_CONTROL.AutodischargeDisconnect is 0. When ROLE_CONTROL.CC1 == > ROLE_CONTROL.CC2, set the other CC to OPEN. > > Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support") > Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > drivers/usb/typec/tcpm/tcpci.c | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c > index 25b480752266..34b5095cc84f 100644 > --- a/drivers/usb/typec/tcpm/tcpci.c > +++ b/drivers/usb/typec/tcpm/tcpci.c > @@ -115,6 +115,32 @@ static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc) > return 0; > } > > +int tcpci_apply_rc(struct tcpc_dev *tcpc, enum typec_cc_status cc, enum typec_cc_polarity polarity) > +{ > + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); > + unsigned int reg; > + int ret; > + > + ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, ®); > + if (ret < 0) > + return ret; > + > + /* > + * APPLY_RC state is when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2 and vbus autodischarge on > + * disconnect is disabled. Bail out when ROLE_CONTROL.CC1 != ROLE_CONTROL.CC2. > + */ > + if (((reg & (TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT)) >> > + TCPC_ROLE_CTRL_CC2_SHIFT) != > + ((reg & (TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT)) >> > + TCPC_ROLE_CTRL_CC1_SHIFT)) > + return 0; > + > + return regmap_update_bits(tcpci->regmap, TCPC_ROLE_CTRL, polarity == TYPEC_POLARITY_CC1 ? > + TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT : > + TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT, > + TCPC_ROLE_CTRL_CC_OPEN); > +} > + > static int tcpci_start_toggling(struct tcpc_dev *tcpc, > enum typec_port_type port_type, > enum typec_cc_status cc) > @@ -728,6 +754,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) > tcpci->tcpc.get_vbus = tcpci_get_vbus; > tcpci->tcpc.set_vbus = tcpci_set_vbus; > tcpci->tcpc.set_cc = tcpci_set_cc; > + tcpci->tcpc.apply_rc = tcpci_apply_rc; > tcpci->tcpc.get_cc = tcpci_get_cc; > tcpci->tcpc.set_polarity = tcpci_set_polarity; > tcpci->tcpc.set_vconn = tcpci_set_vconn; > -- > 2.31.1.751.gd2f1c929bd-goog >