On Fri, Mar 05, 2021 at 08:05:49PM +0100, Sedat Dilek wrote: > On Fri, Mar 5, 2021 at 5:07 PM Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: > > Don't worry about trying to decode the output. To me it looks like the > > drive crashes and needs to be reset at times when the computer sends it > > an ATA command. (Not all ATA commands, but some.) You can prevent this > > by setting the following module parameter for the usb-storage driver: > > > > quirks=174c:55aa:t > > > > where the two numbers are the Vendor and Product IDs for the external > > drive, and the 't' is a quirks flag saying not to use any ATA commands. > > If this module parameter fixes the problem, we can add a permanent quirk > > setting to the kernel. > > > > Thanks Alan. > > I did: > > [ /etc/modules-load.d/usb-storage.conf ] > > # Add quirks for ATA commands for usb-storage devices connected to > ASMedia M1042 USB-3.0 controller > options usb-storage quirks=174c:55aa:t > - EOF - > > It is: > > /lib/modules/5.12.0-rc1-11-amd64-clang13-cfi/kernel/drivers/usb/storage/usb-storage.ko > > But: > > root# lsmod | grep usb | grep storage > usb_storage 90112 2 uas > scsi_mod 307200 6 sd_mod,usb_storage,uas,libata,sg,sr_mod > usbcore 385024 14 > usbserial,xhci_hcd,ehci_pci,usbnet,usbhid,usb_storage,usb_wwan,uvcvideo,ehci_hcd,btusb,xhci_pci,cdc_ether,uas,option I don't understand. What is the point of this listing? > I have not rebooted yet. Depending on how your system is set up, the new usb-storage.conf file might need to be copied into the initramfs image. However, you don't need to reload the driver module or reboot. To make the new quirk take effect, all you have to do is write 174c:55aa:t to /sys/module/usb_storage/parameters/quirks. > Interferences with PowerTop? Maybe. It's entirely possible that PowerTop or some other program is issuing the troublesome ATA commands. > These xhci-resets happen every 10mins in a sequence of 4. > > I have here a powertop.service (systemd) with passing --auto-tune option. > That was not a problem with previous Linux-kernels >= v5.12-rc1, so. > > Alan, what do you think? Try turning the service off and see if that makes any difference. Alan Stern
