On Sun, 2021-01-17 at 09:43 -0800, Guenter Roeck wrote:
> On 1/15/21 6:13 AM, cy_huang wrote:
> > From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> >
> > MT6360 not support for TCPC command to control source and sink.
>
> does not
>
> > Uses external 5V vbus regulator as the vbus source control.
> >
> Use
>
> > Also adds the capability to report vsafe0v.
> >
> add
>
> So far this driver works without regulator. Unless I am missing something,
> this patch makes regulator support mandatory, meaning existing code will fail.
If don't provide vbus-supply in DTS, regulator framework will provide a
dummy regulator, so the code will not fail.
> I am not sure if that is appropriate/acceptable. Can we be sure that this will
> work for existing users of this driver ?
>
> Thanks,
> Guenter
>
> > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > ---
> > drivers/usb/typec/tcpm/tcpci_mt6360.c | 29 +++++++++++++++++++++++++++++
> > 1 file changed, 29 insertions(+)
> >
> > diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c
> > index f1bd9e0..0edf4b6 100644
> > --- a/drivers/usb/typec/tcpm/tcpci_mt6360.c
> > +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
> > @@ -11,6 +11,7 @@
> > #include <linux/of.h>
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > #include <linux/usb/tcpm.h>
> >
> > #include "tcpci.h"
> > @@ -36,6 +37,7 @@ struct mt6360_tcpc_info {
> > struct tcpci_data tdata;
> > struct tcpci *tcpci;
> > struct device *dev;
> > + struct regulator *vbus;
> > int irq;
> > };
> >
> > @@ -51,6 +53,27 @@ static inline int mt6360_tcpc_write16(struct regmap *regmap,
> > return regmap_raw_write(regmap, reg, &val, sizeof(u16));
> > }
> >
> > +static int mt6360_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data, bool src, bool snk)
> > +{
> > + struct mt6360_tcpc_info *mti = container_of(data, struct mt6360_tcpc_info, tdata);
> > + int ret;
> > +
> > + /* To correctly handle the already enabled vbus and disable its supply first */
> > + if (regulator_is_enabled(mti->vbus)) {
> > + ret = regulator_disable(mti->vbus);
> > + if (ret)
> > + return ret;
> > + }
>
> Is it really a good idea to disable vbus if it happens to be already enabled
> and there is (another ?) request to enable it ?
>
> > +
> > + if (src) {
> > + ret = regulator_enable(mti->vbus);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata)
> > {
> > struct regmap *regmap = tdata->regmap;
> > @@ -138,7 +161,13 @@ static int mt6360_tcpc_probe(struct platform_device *pdev)
> > if (mti->irq < 0)
> > return mti->irq;
> >
> > + mti->vbus = devm_regulator_get(&pdev->dev, "vbus");
> > + if (IS_ERR(mti->vbus))
> > + return PTR_ERR(mti->vbus);
> > +
> > mti->tdata.init = mt6360_tcpc_init;
> > + mti->tdata.set_vbus = mt6360_tcpc_set_vbus;
> > + mti->tdata.vbus_vsafe0v = 1;
> > mti->tcpci = tcpci_register_port(&pdev->dev, &mti->tdata);
> > if (IS_ERR(mti->tcpci)) {
> > dev_err(&pdev->dev, "Failed to register tcpci port\n");
> >
>
