On Fri, Jan 08, 2021 at 02:19:30AM +0000, Thinh Nguyen wrote:
> Hi Wesley,
>
> Felipe Balbi wrote:
> > Hi,
> >
> > Wesley Cheng <wcheng@xxxxxxxxxxxxxx> writes:
> >> +void composite_reset(struct usb_gadget *gadget)
> >> +{
> >> + /*
> >> + * Section 1.4.13 Standard Downstream Port of the USB battery charging
> >> + * specification v1.2 states that a device connected on a SDP shall only
> >> + * draw at max 100mA while in a connected, but unconfigured state.
> > The requirements are different, though. I think OTG spec has some extra
> > requirements where only 8mA can be drawn max. You need to check for the
> > otg flag. Moreover, USB3+ spec has units of 150mA meaning the device
> > can't draw 100mA (IIRC).
> >
>
> We see issue with this patch series. For our device running at SSP, the
> device couldn't recover from a port reset and remained in eSS.Inactive
> state.
>
> This patch series is already in Greg's usb-testing. Please review and
> help fix it.
Should I just revert this? I'll be glad to drop it.
thanks,
greg k-h
