Support programming of waking up from a low power mode by implementing the
generic set_wakeup() callback of the USB PHY API.
Tested-by: Matt Merhar <mattmerhar@xxxxxxxxxxxxxx>
Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx>
Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
Tested-by: Ion Agorria <ion@xxxxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
drivers/usb/phy/phy-tegra-usb.c | 100 ++++++++++++++++++++++++++----
include/linux/usb/tegra_usb_phy.h | 2 +
2 files changed, 91 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 1296524e1bee..a48452a6172b 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -45,6 +45,7 @@
#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
#define USB_SUSP_CTRL 0x400
+#define USB_WAKE_ON_RESUME_EN BIT(2)
#define USB_WAKE_ON_CNNT_EN_DEV BIT(3)
#define USB_WAKE_ON_DISCON_EN_DEV BIT(4)
#define USB_SUSP_CLR BIT(5)
@@ -56,6 +57,15 @@
#define USB_SUSP_SET BIT(14)
#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16)
+#define USB_PHY_VBUS_SENSORS 0x404
+#define B_SESS_VLD_WAKEUP_EN BIT(6)
+#define B_VBUS_VLD_WAKEUP_EN BIT(14)
+#define A_SESS_VLD_WAKEUP_EN BIT(22)
+#define A_VBUS_VLD_WAKEUP_EN BIT(30)
+
+#define USB_PHY_VBUS_WAKEUP_ID 0x408
+#define VBUS_WAKEUP_WAKEUP_EN BIT(30)
+
#define USB1_LEGACY_CTRL 0x410
#define USB1_NO_LEGACY_MODE BIT(0)
#define USB1_VBUS_SENSE_CTL_MASK (3 << 1)
@@ -334,6 +344,11 @@ static int utmip_pad_power_on(struct tegra_usb_phy *phy)
writel_relaxed(val, base + UTMIP_BIAS_CFG0);
}
+ if (phy->pad_wakeup) {
+ phy->pad_wakeup = false;
+ utmip_pad_count--;
+ }
+
spin_unlock(&utmip_pad_lock);
clk_disable_unprepare(phy->pad_clk);
@@ -359,6 +374,17 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy)
goto ulock;
}
+ /*
+ * In accordance to TRM, OTG and Bias pad circuits could be turned off
+ * to save power if wake is enabled, but the VBUS-change detection
+ * method is board-specific and these circuits may need to be enabled
+ * to generate wakeup event, hence we will just keep them both enabled.
+ */
+ if (phy->wakeup_enabled) {
+ phy->pad_wakeup = true;
+ utmip_pad_count++;
+ }
+
if (--utmip_pad_count == 0) {
val = readl_relaxed(base + UTMIP_BIAS_CFG0);
val |= UTMIP_OTGPD | UTMIP_BIASPD;
@@ -503,11 +529,24 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
writel_relaxed(val, base + UTMIP_PLL_CFG1);
}
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_WAKE_ON_RESUME_EN;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
if (phy->mode == USB_DR_MODE_PERIPHERAL) {
val = readl_relaxed(base + USB_SUSP_CTRL);
val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
writel_relaxed(val, base + USB_SUSP_CTRL);
+ val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+ val &= ~VBUS_WAKEUP_WAKEUP_EN;
+ writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+ val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
+ val &= ~(A_VBUS_VLD_WAKEUP_EN | A_SESS_VLD_WAKEUP_EN);
+ val &= ~(B_VBUS_VLD_WAKEUP_EN | B_SESS_VLD_WAKEUP_EN);
+ writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
+
val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
val &= ~UTMIP_PD_CHRG;
writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
@@ -605,31 +644,51 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy)
utmi_phy_clk_disable(phy);
- if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+ /* PHY won't resume if reset is asserted */
+ if (!phy->wakeup_enabled) {
val = readl_relaxed(base + USB_SUSP_CTRL);
- val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
- val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
+ val |= UTMIP_RESET;
writel_relaxed(val, base + USB_SUSP_CTRL);
}
- val = readl_relaxed(base + USB_SUSP_CTRL);
- val |= UTMIP_RESET;
- writel_relaxed(val, base + USB_SUSP_CTRL);
-
val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
val |= UTMIP_PD_CHRG;
writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
- val = readl_relaxed(base + UTMIP_XCVR_CFG0);
- val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
- UTMIP_FORCE_PDZI_POWERDOWN;
- writel_relaxed(val, base + UTMIP_XCVR_CFG0);
+ if (!phy->wakeup_enabled) {
+ val = readl_relaxed(base + UTMIP_XCVR_CFG0);
+ val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+ UTMIP_FORCE_PDZI_POWERDOWN;
+ writel_relaxed(val, base + UTMIP_XCVR_CFG0);
+ }
val = readl_relaxed(base + UTMIP_XCVR_CFG1);
val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
UTMIP_FORCE_PDDR_POWERDOWN;
writel_relaxed(val, base + UTMIP_XCVR_CFG1);
+ if (phy->wakeup_enabled) {
+ val = readl_relaxed(base + USB_SUSP_CTRL);
+ val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+ val |= USB_WAKEUP_DEBOUNCE_COUNT(5);
+ val |= USB_WAKE_ON_RESUME_EN;
+ writel_relaxed(val, base + USB_SUSP_CTRL);
+
+ /*
+ * Ask VBUS sensor to generate wake event once cable is
+ * connected.
+ */
+ if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+ val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+ val |= VBUS_WAKEUP_WAKEUP_EN;
+ writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+ val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
+ val |= A_VBUS_VLD_WAKEUP_EN;
+ writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
+ }
+ }
+
return utmip_pad_power_off(phy);
}
@@ -765,6 +824,15 @@ static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
usleep_range(5000, 6000);
clk_disable_unprepare(phy->clk);
+ /*
+ * Wakeup currently unimplemented for ULPI, thus PHY needs to be
+ * force-resumed.
+ */
+ if (WARN_ON_ONCE(phy->wakeup_enabled)) {
+ ulpi_phy_power_on(phy);
+ return -EOPNOTSUPP;
+ }
+
return 0;
}
@@ -827,6 +895,15 @@ static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
phy->freq = NULL;
}
+static int tegra_usb_phy_set_wakeup(struct usb_phy *u_phy, bool enable)
+{
+ struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+
+ phy->wakeup_enabled = enable;
+
+ return 0;
+}
+
static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend)
{
struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
@@ -1198,6 +1275,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
tegra_phy->u_phy.dev = &pdev->dev;
tegra_phy->u_phy.init = tegra_usb_phy_init;
tegra_phy->u_phy.shutdown = tegra_usb_phy_shutdown;
+ tegra_phy->u_phy.set_wakeup = tegra_usb_phy_set_wakeup;
tegra_phy->u_phy.set_suspend = tegra_usb_phy_set_suspend;
platform_set_drvdata(pdev, tegra_phy);
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index c29d1b4c9381..fd1c9f6a4e37 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -79,6 +79,8 @@ struct tegra_usb_phy {
bool is_ulpi_phy;
struct gpio_desc *reset_gpio;
struct reset_control *pad_rst;
+ bool wakeup_enabled;
+ bool pad_wakeup;
bool powered_on;
};
--
2.29.2
