[PATCH v3 1/9] usb: phy: tegra: Add delay after power up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The PHY hardware needs the delay of 2ms after power up, otherwise initial
interrupt may be lost if USB controller is accessed before PHY is settled
down. Previously this issue was masked by implicit delays, but now it pops
up after squashing the older ehci-tegra driver into the ChipIdea driver.

Tested-by: Matt Merhar <mattmerhar@xxxxxxxxxxxxxx>
Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx>
Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
Tested-by: Ion Agorria <ion@xxxxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/usb/phy/phy-tegra-usb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 03a333797382..1296524e1bee 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -784,6 +784,9 @@ static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
 
 	phy->powered_on = true;
 
+	/* Let PHY settle down */
+	usleep_range(2000, 2500);
+
 	return 0;
 }
 
-- 
2.29.2




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux