Re: [Bisected] [Bug #13821] Replugging USB serial converter uses new device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 27.Jul'09 at 17:53:18 +0200, Ferenc Wagner wrote:
> Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> writes:
> >
> > Are you certain this really is a regression?  Under 2.6.30 and 2.6.27
> > the same thing happened if I unplugged a USB serial device while it was
> > in use.
> 
> My original report is about unplugging the USB servial device *after*
> using it.

Yes, I did this:

     1) plug the surfstick
     2) connect to the internert (with draknetcenter)
     3) disconnect (and wait a bit)
     4) unplug the surfstick (and wait a bit)

Then when I plug it again, the devices created are /dev/ttyUSB{1,2} instead
of /dev/ttyUSB{0,1}.

That breaks 'draknetcenter', because if I try to connect again it
says that /dev/ttyUSB0 can not be found.

And during the bisection, for the commits which were marked "good", there
was no problem to reconnect and 'draknetcenter' was happy (although perhaps
it should not be so dependent on /dev/tttyUSB0 only, but that is another
story).
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux