On Sat, Jul 18, 2009 at 11:45:26AM +0200, Oliver Neukum wrote:
> Am Samstag, 18. Juli 2009 09:46:44 schrieb Adam:
> > On Sat, Jul 18, 2009 at 07:18:10AM +0200, Oliver Neukum wrote:
> > > Am Samstag, 18. Juli 2009 06:59:14 schrieb Adam:
> > > > The usb mouse reciever doesn't work when I connected it to a downstream
> > > > port. But it works on upstream ports. And I found reciever is not
> > > > reccognized on downstream because no device of this reciever in outputs
> > > > of lsusb. Is there any method to get it work on downstream ports? I
> > > > need your help.
> > >
> > > Is the hub bus powered? Please post lsusb -v. It is impossible to tell
> > > what went wrong based just on lsusb.
> >
> > I think the hub bus could be powered on because another normal cord
> > mouse works fine on the same port. Here comes lsusb -v output when I
> > connect the reciever to a downstream port.
>
> OK, now this is better. Your hub consumes 64mA. It is entitled to a maximum
> of 100mA, so this is not a problem. Any device may draw up to 100mA on
> this hub's port. Nevertheless any device should still be visible and remain
> unconfigured, even if it needs more to work.
> From experience it is true that bus powered hubs are likelier to be flaky.
> But it still should work and perhaps we find the cause. But we need "dmesg"
> and "lsusb -v" of the working mouse.
>
Thanks you, Oliver.
Here is "dmesg" and "lsusb -v" output of working mouse which connect to
the same port as bluetooth mouse do.
lsusb -v
----------------------------------------------------------------------
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.28-14-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.28-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.28-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.28-14-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 004: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc019 Optical Tilt Wheel Mouse
bcdDevice 43.01
iManufacturer 1 Logitech
iProduct 2 USB Optical Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 55
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 004 Device 003: ID 04fe:0007 PFU, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04fe PFU, Ltd
idProduct 0x0007
bcdDevice 1.02
iManufacturer 5 Chicony
iProduct 6 PFU-68 USB Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 6 PFU-68 USB Keyboard
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 36mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 24
Device Status: 0x0000
(Bus Powered)
Bus 004 Device 002: ID 04fe:0008 PFU, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x04fe PFU, Ltd
idProduct 0x0008
bcdDevice 1.02
iManufacturer 1 Chicony
iProduct 2 Generic USB Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 64mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x000d
Per-port power switching
Compound device
Per-port overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 90 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0303 lowspeed power enable connect
Device Status: 0x0000
(Bus Powered)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.28-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0483 SGS Thomson Microelectronics
idProduct 0x2016 Fingerprint Reader
bcdDevice 0.01
iManufacturer 1 STMicroelectronics
iProduct 2 Biometric Coprocessor
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 20
Device Status: 0x0000
(Bus Powered)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.28-14-generic uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0103 power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
----------------------------------------------------------------------
dmesg
----------------------------------------------------------------------
[ 0.000000] BIOS EBDA/lowmem at: 0009d800/0009d800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-14-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #46-Ubuntu SMP Wed Jul 8 07:21:34 UTC 2009 (Ubuntu 2.6.28-14.46-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009e6b0000 (usable)
[ 0.000000] BIOS-e820: 000000009e6b0000 - 000000009e6cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009e6cc000 - 000000009e700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009e700000 - 000000009f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x9e6b0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000090800 (usable)
[ 0.000000] modified: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000009e6b0000 (usable)
[ 0.000000] modified: 000000009e6b0000 - 000000009e6cc000 (ACPI data)
[ 0.000000] modified: 000000009e6cc000 - 000000009e700000 (ACPI NVS)
[ 0.000000] modified: 000000009e700000 - 000000009f000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 3784b000 - 37fef9ca
[ 0.000000] Allocated new RAMDISK: 0087b000 - 0101f9ca
[ 0.000000] Move RAMDISK from 000000003784b000 - 0000000037fef9c9 to 0087b000 - 0101f9c9
[ 0.000000] ACPI: RSDP 000F6950, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 9E6BD368, 0094 (r1 LENOVO TP-7N 2200 LTP 0)
[ 0.000000] ACPI: FACP 9E6BD500, 00F4 (r3 LENOVO TP-7N 2200 LNVO 1)
[ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926]
[ 0.000000] ACPI: DSDT 9E6BD8DB, E32A (r1 LENOVO TP-7N 2200 MSFT 3000000)
[ 0.000000] ACPI: FACS 9E6E4000, 0040
[ 0.000000] ACPI: SSDT 9E6BD6B4, 0227 (r1 LENOVO TP-7N 2200 MSFT 3000000)
[ 0.000000] ACPI: ECDT 9E6CBC05, 0052 (r1 LENOVO TP-7N 2200 LNVO 1)
[ 0.000000] ACPI: TCPA 9E6CBC57, 0032 (r2 LENOVO TP-7N 2200 LNVO 1)
[ 0.000000] ACPI: APIC 9E6CBC89, 0068 (r1 LENOVO TP-7N 2200 LNVO 1)
[ 0.000000] ACPI: MCFG 9E6CBCF1, 003C (r1 LENOVO TP-7N 2200 LNVO 1)
[ 0.000000] ACPI: HPET 9E6CBD2D, 0038 (r1 LENOVO TP-7N 2200 LNVO 1)
[ 0.000000] ACPI: SLIC 9E6CBDF0, 0176 (r1 LENOVO TP-7N 2200 LTP 0)
[ 0.000000] ACPI: BOOT 9E6CBF66, 0028 (r1 LENOVO TP-7N 2200 LTP 1)
[ 0.000000] ACPI: ASF! 9E6CBF8E, 0072 (r16 LENOVO TP-7N 2200 PTL 1)
[ 0.000000] ACPI: SSDT 9E6E2697, 025F (r1 LENOVO TP-7N 2200 INTL 20050513)
[ 0.000000] ACPI: SSDT 9E6E28F6, 00A6 (r1 LENOVO TP-7N 2200 INTL 20050513)
[ 0.000000] ACPI: SSDT 9E6E299C, 04F7 (r1 LENOVO TP-7N 2200 INTL 20050513)
[ 0.000000] ACPI: SSDT 9E6E2E93, 01D8 (r1 LENOVO TP-7N 2200 INTL 20050513)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad X61
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1650MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac]
[ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000]
[ 0.000000] #5 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087b000 - 000101f9ca] NEW RAMDISK ==> [000087b000 - 000101f9ca]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f6980] 000f6980
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0009e6b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000090
[ 0.000000] 0: 0x00000100 -> 0x0009e6b0
[ 0.000000] On node 0 totalpages: 648755
[ 0.000000] free_area_init_node: node 0, pgdat c06c9500, node_mem_map c1020000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3939 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3302 pages used for memmap
[ 0.000000] HighMem zone: 419276 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000090000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at a0000000 (gap: 9f000000:51000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 643685
[ 0.000000] Kernel command line: root=UUID=220788c4-5351-4253-a5c3-81c107af4521 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.470 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 12977600 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2544764k/2595520k available (4111k kernel code, 49412k reserved, 2196k data, 532k init, 1690312k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
[ 0.004000] .data : 0xc0503d2f - 0xc0728e60 (2196 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0503d2f (4111 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.94 BogoMIPS (lpj=7181880)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018350] ACPI: Core revision 20080926
[ 0.024171] ACPI: Checking initramfs for custom DSDT
[ 0.348496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.390227] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.392001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3590.98 BogoMIPS (lpj=7181975)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.476441] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.476461] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.480001] Measured 294318 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.480001] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.480035] Brought up 2 CPUs
[ 0.480038] Total of 2 processors activated (7181.92 BogoMIPS).
[ 0.480098] CPU0 attaching sched-domain:
[ 0.480101] domain 0: span 0-1 level MC
[ 0.480104] groups: 0 1
[ 0.480110] CPU1 attaching sched-domain:
[ 0.480112] domain 0: span 0-1 level MC
[ 0.480115] groups: 1 0
[ 0.480186] net_namespace: 776 bytes
[ 0.480186] Booting paravirtualized kernel on bare hardware
[ 0.480342] Time: 17:44:29 Date: 07/18/09
[ 0.480342] regulator: core version 0.5
[ 0.480342] NET: Registered protocol family 16
[ 0.480342] EISA bus registered
[ 0.480342] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.480342] ACPI: bus type pci registered
[ 0.480342] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.480342] PCI: MCFG area at f0000000 reserved in E820
[ 0.480342] PCI: Using MMCONFIG for extended config space
[ 0.480342] PCI: Using configuration type 1 for base access
[ 0.484329] ACPI: EC: EC description table is found, configuring boot EC
[ 0.492020] ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.492025] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.509043] ACPI: Interpreter enabled
[ 0.509047] ACPI: (supports S0 S3 S4 S5)
[ 0.509055] ACPI: Using IOAPIC for interrupt routing
[ 0.528767] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[ 0.528769] ACPI: EC: driver started in interrupt mode
[ 0.532305] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.532320] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.532416] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf80fffff]
[ 0.532424] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 0.532429] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.532466] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
[ 0.532698] pci 0000:00:19.0: reg 10 32bit mmio: [0xf8200000-0xf821ffff]
[ 0.532715] pci 0000:00:19.0: reg 14 32bit mmio: [0xf8225000-0xf8225fff]
[ 0.532733] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
[ 0.532820] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.532829] pci 0000:00:19.0: PME# disabled
[ 0.532960] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
[ 0.533114] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
[ 0.533256] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8426c00-0xf8426fff]
[ 0.533374] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.533383] pci 0000:00:1a.7: PME# disabled
[ 0.533511] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8220000-0xf8223fff]
[ 0.533613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.533623] pci 0000:00:1b.0: PME# disabled
[ 0.533780] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.533790] pci 0000:00:1c.0: PME# disabled
[ 0.533960] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.533969] pci 0000:00:1c.1: PME# disabled
[ 0.534137] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
[ 0.534288] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
[ 0.534452] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8427000-0xf84273ff]
[ 0.534561] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.534571] pci 0000:00:1d.7: PME# disabled
[ 0.534914] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.534921] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.535001] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.535019] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.535036] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.535053] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.535070] pci 0000:00:1f.1: reg 20 io port: [0x18e0-0x18ef]
[ 0.535245] pci 0000:00:1f.2: reg 10 io port: [0x1c30-0x1c37]
[ 0.535263] pci 0000:00:1f.2: reg 14 io port: [0x1c24-0x1c27]
[ 0.535280] pci 0000:00:1f.2: reg 18 io port: [0x1c28-0x1c2f]
[ 0.535297] pci 0000:00:1f.2: reg 1c io port: [0x1c20-0x1c23]
[ 0.535311] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f]
[ 0.535329] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8426000-0xf84267ff]
[ 0.535378] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.535387] pci 0000:00:1f.2: PME# disabled
[ 0.535461] pci 0000:00:1f.3: reg 10 32bit mmio: [0xf8427400-0xf84274ff]
[ 0.535524] pci 0000:00:1f.3: reg 20 io port: [0x1c40-0x1c5f]
[ 0.535733] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.535743] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.535760] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8500000-0xf85fffff]
[ 0.535944] pci 0000:03:00.0: reg 10 64bit mmio: [0xf7f00000-0xf7f01fff]
[ 0.536083] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.536096] pci 0000:03:00.0: PME# disabled
[ 0.536266] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.536273] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.536291] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf8600000-0xf86fffff]
[ 0.536390] pci 0000:05:00.0: reg 10 32bit mmio: [0xd7eff000-0xd7efffff]
[ 0.536416] pci 0000:05:00.0: supports D1 D2
[ 0.536418] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.536428] pci 0000:05:00.0: PME# disabled
[ 0.536529] pci 0000:05:00.1: reg 10 32bit mmio: [0xd7efe800-0xd7efefff]
[ 0.536642] pci 0000:05:00.1: supports D1 D2
[ 0.536644] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.536654] pci 0000:05:00.1: PME# disabled
[ 0.536749] pci 0000:05:00.2: reg 10 32bit mmio: [0xd7efe400-0xd7efe4ff]
[ 0.536864] pci 0000:05:00.2: supports D1 D2
[ 0.536866] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.536876] pci 0000:05:00.2: PME# disabled
[ 0.537025] pci 0000:00:1e.0: transparent bridge
[ 0.537034] pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff]
[ 0.537044] pci 0000:00:1e.0: bridge 32bit mmio: [0xd4000000-0xd7efffff]
[ 0.537061] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdbffffff]
[ 0.537157] bus 00 -> node 0
[ 0.537166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.537479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.537646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.537818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.541739] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.542008] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.542274] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.542540] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.542804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.543070] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.543334] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.543599] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.544098] ACPI: Power Resource [PUBS] (on)
[ 0.544337] ACPI: WMI: Mapper loaded
[ 0.544370] SCSI subsystem initialized
[ 0.544370] libata version 3.00 loaded.
[ 0.544370] usbcore: registered new interface driver usbfs
[ 0.544370] usbcore: registered new interface driver hub
[ 0.544370] usbcore: registered new device driver usb
[ 0.544370] PCI: Using ACPI for IRQ routing
[ 0.548013] Bluetooth: Core ver 2.13
[ 0.548018] NET: Registered protocol family 31
[ 0.548018] Bluetooth: HCI device and connection manager initialized
[ 0.548018] Bluetooth: HCI socket layer initialized
[ 0.548019] NET: Registered protocol family 8
[ 0.548021] NET: Registered protocol family 20
[ 0.548033] NetLabel: Initializing
[ 0.548035] NetLabel: domain hash size = 128
[ 0.548037] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.548053] NetLabel: unlabeled traffic allowed by default
[ 0.548072] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.548078] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.552074] AppArmor: AppArmor Filesystem Enabled
[ 0.556022] Switched to high resolution mode on CPU 0
[ 0.556514] Switched to high resolution mode on CPU 1
[ 0.556523] pnp: PnP ACPI init
[ 0.556532] ACPI: bus type pnp registered
[ 0.562804] pnp: PnP ACPI: found 11 devices
[ 0.562807] ACPI: ACPI bus type pnp unregistered
[ 0.562810] PnPBIOS: Disabled by ACPI PNP
[ 0.562820] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.562823] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.562826] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.562829] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.562832] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.562834] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.562837] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.562840] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.562843] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.562846] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.562848] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.562851] system 00:00: iomem range 0x100000-0x9effffff could not be reserved
[ 0.562854] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.562857] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.562865] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.562868] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.562871] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.562873] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.562876] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.562879] system 00:02: ioport range 0x1600-0x165f could not be reserved
[ 0.562882] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.562885] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.562888] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.562891] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.562894] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.562897] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.597659] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.597665] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.597679] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.597689] pci 0000:00:1c.0: PREFETCH window: 0x000000f8500000-0x000000f85fffff
[ 0.597706] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.597712] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.597725] pci 0000:00:1c.1: MEM window: 0xf6000000-0xf7ffffff
[ 0.597735] pci 0000:00:1c.1: PREFETCH window: 0x000000f8600000-0x000000f86fffff
[ 0.597755] pci 0000:05:00.0: CardBus bridge, secondary bus 0000:06
[ 0.597758] pci 0000:05:00.0: IO window: 0x004000-0x0040ff
[ 0.597767] pci 0000:05:00.0: IO window: 0x004400-0x0044ff
[ 0.597775] pci 0000:05:00.0: PREFETCH window: 0xd8000000-0xdbffffff
[ 0.597785] pci 0000:05:00.0: MEM window: 0xa0000000-0xa3ffffff
[ 0.597795] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.597801] pci 0000:00:1e.0: IO window: 0x4000-0x7fff
[ 0.597814] pci 0000:00:1e.0: MEM window: 0xd4000000-0xd7efffff
[ 0.597824] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
[ 0.597855] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.597865] pci 0000:00:1c.0: setting latency timer to 64
[ 0.597882] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.597890] pci 0000:00:1c.1: setting latency timer to 64
[ 0.597900] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.597913] pci 0000:00:1e.0: setting latency timer to 64
[ 0.597933] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.597942] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.597944] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.597947] bus: 02 index 0 io port: [0x2000-0x2fff]
[ 0.597949] bus: 02 index 1 mmio: [0xf4000000-0xf5ffffff]
[ 0.597951] bus: 02 index 2 mmio: [0xf8500000-0xf85fffff]
[ 0.597953] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.597955] bus: 03 index 0 io port: [0x3000-0x3fff]
[ 0.597958] bus: 03 index 1 mmio: [0xf6000000-0xf7ffffff]
[ 0.597960] bus: 03 index 2 mmio: [0xf8600000-0xf86fffff]
[ 0.597962] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.597964] bus: 05 index 0 io port: [0x4000-0x7fff]
[ 0.597966] bus: 05 index 1 mmio: [0xd4000000-0xd7efffff]
[ 0.597968] bus: 05 index 2 mmio: [0xd8000000-0xdbffffff]
[ 0.597971] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.597973] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.597975] bus: 06 index 0 io port: [0x4000-0x40ff]
[ 0.597977] bus: 06 index 1 io port: [0x4400-0x44ff]
[ 0.597979] bus: 06 index 2 mmio: [0xd8000000-0xdbffffff]
[ 0.597982] bus: 06 index 3 mmio: [0xa0000000-0xa3ffffff]
[ 0.597990] NET: Registered protocol family 2
[ 0.609068] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.609324] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.609686] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.609882] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.609884] TCP reno registered
[ 0.613091] NET: Registered protocol family 1
[ 0.613211] checking if image is initramfs... it is
[ 1.320705] Freeing initrd memory: 7826k freed
[ 1.320746] Simple Boot Flag at 0x35 set to 0x1
[ 1.320947] cpufreq: No nForce2 chipset.
[ 1.321135] audit: initializing netlink socket (disabled)
[ 1.321152] type=2000 audit(1247939069.321:1): initialized
[ 1.329032] highmem bounce pool size: 64 pages
[ 1.329037] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.330475] VFS: Disk quotas dquot_6.5.1
[ 1.330537] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.331188] fuse init (API version 7.10)
[ 1.331277] msgmni has been set to 1685
[ 1.331484] alg: No test for stdrng (krng)
[ 1.331498] io scheduler noop registered
[ 1.331500] io scheduler anticipatory registered
[ 1.331502] io scheduler deadline registered
[ 1.331516] io scheduler cfq registered (default)
[ 1.331529] pci 0000:00:02.0: Boot video device
[ 1.343561] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.343682] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.343766] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.343803] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.343818] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.343831] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.343997] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.344129] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.344209] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 1.344246] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.344261] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.344274] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.344438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.345221] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did 0
[ 1.345293] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded
[ 1.346024] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 2841 ss_vid 0 ss_did 0
[ 1.346090] pciehp 0000:00:1c.1:pcie02: service driver pciehp loaded
[ 1.346103] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.347145] ACPI: AC Adapter [AC] (on-line)
[ 1.399928] ACPI: Battery Slot [BAT0] (battery present)
[ 1.400007] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.400010] ACPI: Power Button (FF) [PWRF]
[ 1.400058] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.400585] ACPI: Lid Switch [LID]
[ 1.400632] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.400641] ACPI: Sleep Button (CM) [SLPB]
[ 1.401250] ACPI: SSDT 9E6E1B32, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513)
[ 1.401916] ACPI: SSDT 9E6E1E39, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
[ 1.404932] Monitor-Mwait will be used to enter C-1 state
[ 1.404935] Monitor-Mwait will be used to enter C-2 state
[ 1.404949] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.404973] processor ACPI_CPU:00: registered as cooling_device0
[ 1.404976] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.405339] ACPI: SSDT 9E6E1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
[ 1.406010] ACPI: SSDT 9E6E1DB4, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
[ 1.407716] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.407735] processor ACPI_CPU:01: registered as cooling_device1
[ 1.407740] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.419651] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.423535] ACPI: Thermal Zone [THM0] (68 C)
[ 1.424689] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.426096] ACPI: Thermal Zone [THM1] (67 C)
[ 1.426153] isapnp: Scanning for PnP cards...
[ 1.783987] isapnp: No Plug & Play device found
[ 1.792169] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.793279] brd: module loaded
[ 1.793602] loop: module loaded
[ 1.793670] Fixed MDIO Bus: probed
[ 1.793675] PPP generic driver version 2.4.2
[ 1.793733] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.793764] Driver 'sd' needs updating - please use bus_type methods
[ 1.793773] Driver 'sr' needs updating - please use bus_type methods
[ 1.793818] ahci 0000:00:1f.2: version 3.0
[ 1.793838] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.793913] ahci 0000:00:1f.2: irq 2301 for MSI/MSI-X
[ 1.793999] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.794002] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 1.794012] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.794211] scsi0 : ahci
[ 1.794309] scsi1 : ahci
[ 1.794379] scsi2 : ahci
[ 1.794451] ata1: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 2301
[ 1.794454] ata2: DUMMY
[ 1.794459] ata3: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426200 irq 2301
[ 2.336045] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.337225] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 2.337228] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.337412] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 2.337415] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.338292] ata1.00: ATA-7: HITACHI HTS541680J9SA00, SB2IC7UP, max UDMA/100
[ 2.338295] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.339637] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 2.339640] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.339823] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 2.339826] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.340722] ata1.00: configured for UDMA/100
[ 2.358031] ata1.00: configured for UDMA/100
[ 2.358034] ata1: EH complete
[ 2.676041] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.692130] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54168 SB2I PQ: 0 ANSI: 5
[ 2.692225] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.692242] sd 0:0:0:0: [sda] Write Protect is off
[ 2.692245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.692272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.692329] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.692345] sd 0:0:0:0: [sda] Write Protect is off
[ 2.692347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.692373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.692377] sda: sda1 sda2 sda3 sda4
[ 3.110818] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.110866] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.110916] ata_piix 0000:00:1f.1: version 2.12
[ 3.110926] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 3.110969] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.111070] scsi3 : ata_piix
[ 3.111139] scsi4 : ata_piix
[ 3.112040] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 3.112043] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 3.282085] ata5: port disabled. ignoring.
[ 3.282814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.283511] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 3.283525] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.283543] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.283549] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.283606] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.287525] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.287541] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf8426c00
[ 3.300030] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.300096] usb usb1: configuration #1 chosen from 1 choice
[ 3.300124] hub 1-0:1.0: USB hub found
[ 3.300131] hub 1-0:1.0: 4 ports detected
[ 3.300920] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 3.300934] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.300950] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.300956] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.301021] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.304947] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.304961] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.304977] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8427000
[ 3.320032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.320103] usb usb2: configuration #1 chosen from 1 choice
[ 3.320136] hub 2-0:1.0: USB hub found
[ 3.320142] hub 2-0:1.0: 4 ports detected
[ 3.320244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.320261] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.320288] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.320299] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.320304] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.320350] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.320396] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 3.320472] usb usb3: configuration #1 chosen from 1 choice
[ 3.320506] hub 3-0:1.0: USB hub found
[ 3.320512] hub 3-0:1.0: 2 ports detected
[ 3.321217] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 3.321224] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.321235] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.321241] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.321289] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.321335] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 3.321413] usb usb4: configuration #1 chosen from 1 choice
[ 3.321442] hub 4-0:1.0: USB hub found
[ 3.321448] hub 4-0:1.0: 2 ports detected
[ 3.322358] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 3.322364] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.322375] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.322380] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.322424] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.322467] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 3.322548] usb usb5: configuration #1 chosen from 1 choice
[ 3.322576] hub 5-0:1.0: USB hub found
[ 3.322582] hub 5-0:1.0: 2 ports detected
[ 3.322673] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.322684] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.322690] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.322735] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.322777] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 3.322858] usb usb6: configuration #1 chosen from 1 choice
[ 3.322884] hub 6-0:1.0: USB hub found
[ 3.322891] hub 6-0:1.0: 2 ports detected
[ 3.323037] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.335735] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.335741] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.336050] mice: PS/2 mouse device common for all mice
[ 3.352092] rtc_cmos 00:07: RTC can wake from S4
[ 3.352129] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.352167] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.352226] device-mapper: uevent: version 1.0.3
[ 3.352329] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 3.352431] device-mapper: multipath: version 1.0.5 loaded
[ 3.352433] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.352532] EISA: Probing bus 0 at eisa.0
[ 3.352540] Cannot allocate resource for EISA slot 1
[ 3.352543] Cannot allocate resource for EISA slot 2
[ 3.352545] Cannot allocate resource for EISA slot 3
[ 3.352547] Cannot allocate resource for EISA slot 4
[ 3.352550] Cannot allocate resource for EISA slot 5
[ 3.352552] Cannot allocate resource for EISA slot 6
[ 3.352554] Cannot allocate resource for EISA slot 7
[ 3.352562] EISA: Detected 0 cards.
[ 3.352706] cpuidle: using governor ladder
[ 3.352806] cpuidle: using governor menu
[ 3.353347] TCP cubic registered
[ 3.353444] NET: Registered protocol family 10
[ 3.353911] lo: Disabled Privacy Extensions
[ 3.354278] NET: Registered protocol family 17
[ 3.354296] Bluetooth: L2CAP ver 2.11
[ 3.354298] Bluetooth: L2CAP socket layer initialized
[ 3.354301] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.354303] Bluetooth: SCO socket layer initialized
[ 3.354355] Bluetooth: RFCOMM socket layer initialized
[ 3.354362] Bluetooth: RFCOMM TTY layer initialized
[ 3.354363] Bluetooth: RFCOMM ver 1.10
[ 3.355305] Using IPI No-Shortcut mode
[ 3.355375] registered taskstats version 1
[ 3.355493] Magic number: 1:845:744
[ 3.355586] rtc_cmos 00:07: setting system clock to 2009-07-18 17:44:32 UTC (1247939072)
[ 3.355589] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.355591] EDD information not available.
[ 3.355864] Freeing unused kernel memory: 532k freed
[ 3.356014] Write protecting the kernel text: 4112k
[ 3.356071] Write protecting the kernel read-only data: 1524k
[ 3.358440] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.593342] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 3.593345] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.593418] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.593431] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.593673] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 3.703833] ohci1394 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.755582] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d7efe800-d7efefff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.802988] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:72:80:26:bf
[ 3.802992] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.803030] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
[ 4.072068] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.257520] usb 3-2: configuration #1 chosen from 1 choice
[ 4.319527] PM: Starting manual resume from disk
[ 4.319530] PM: Resume from partition 8:3
[ 4.319532] PM: Checking hibernation image.
[ 4.319674] PM: Resume from disk failed.
[ 4.347474] EXT4-fs: barriers enabled
[ 4.366609] kjournald2 starting. Commit interval 5 seconds
[ 4.366624] EXT4-fs: delayed allocation enabled
[ 4.366626] EXT4-fs: file extents enabled
[ 4.367108] EXT4-fs: mballoc enabled
[ 4.367112] EXT4-fs: mounted filesystem with ordered data mode.
[ 4.500082] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 4.670498] usb 4-1: configuration #1 chosen from 1 choice
[ 4.672444] hub 4-1:1.0: USB hub found
[ 4.674391] hub 4-1:1.0: 3 ports detected
[ 4.916058] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 5.032226] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001d72ffff8026bf]
[ 5.090619] usb 5-1: configuration #1 chosen from 1 choice
[ 5.169397] usb 4-1.1: new full speed USB device using uhci_hcd and address 3
[ 5.306492] usb 4-1.1: configuration #1 chosen from 1 choice
[ 9.908068] udev: starting version 141
[ 10.034718] Linux agpgart interface v0.103
[ 10.070198] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 10.070906] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 10.073600] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 10.199140] iTCO_vendor_support: vendor-support=0
[ 10.233946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 10.234110] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 10.234175] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.319541] usbcore: registered new interface driver hiddev
[ 10.337891] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[ 10.341109] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1/input0
[ 10.344790] input: Chicony PFU-68 USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input6
[ 10.345552] generic-usb 0003:04FE:0007.0002: input,hidraw1: USB HID v1.00 Keyboard [Chicony PFU-68 USB Keyboard] on usb-0000:00:1a.1-1.1/input0
[ 10.345572] usbcore: registered new interface driver usbhid
[ 10.345596] usbhid: v2.6:USB HID core driver
[ 10.417960] acpi device:03: registered as cooling_device2
[ 10.418318] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input7
[ 10.421192] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 10.496170] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 10.529823] cfg80211: Calling CRDA to update world regulatory domain
[ 10.550978] Non-volatile memory driver v1.2
[ 10.667545] yenta_cardbus 0000:05:00.0: CardBus bridge found [17aa:20c6]
[ 10.680057] cfg80211: World regulatory domain updated:
[ 10.680060] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.680063] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.680066] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.680068] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.680071] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.680073] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.688999] sdhci: Secure Digital Host Controller Interface driver
[ 10.689002] sdhci: Copyright(c) Pierre Ossman
[ 10.798391] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 10.798398] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[ 10.798403] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
[ 10.798407] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x7fff: clean.
[ 10.799492] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7efffff
[ 10.799495] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdbffffff
[ 10.849613] usbcore: registered new interface driver lmpcm_usb
[ 10.849660] lmpcm_usb: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[ 11.001774] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 11.001803] sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.001870] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.001881] sdhci-pci 0000:05:00.2: setting latency timer to 64
[ 11.003979] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[ 11.029226] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 11.213721] psmouse serio1: ID: 10 00 64<6>thinkpad_acpi: ThinkPad ACPI Extras v0.21
[ 11.270540] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 11.270542] thinkpad_acpi: ThinkPad BIOS 7NETC0WW (2.20 ), EC 7MHT25WW-1.03
[ 11.270545] thinkpad_acpi: Lenovo ThinkPad X61, model 76753BJ
[ 11.271235] thinkpad_acpi: radio switch found; radios are disabled
[ 11.271400] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 11.271403] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 11.282590] Registered led device: tpacpi::thinklight
[ 11.282657] Registered led device: tpacpi::power
[ 11.282683] Registered led device: tpacpi:orange:batt
[ 11.282708] Registered led device: tpacpi:green:batt
[ 11.282732] Registered led device: tpacpi::dock_active
[ 11.282757] Registered led device: tpacpi::bay_active
[ 11.282783] Registered led device: tpacpi::dock_batt
[ 11.282809] Registered led device: tpacpi::unknown_led
[ 11.282835] Registered led device: tpacpi::standby
[ 11.285789] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 11.286158] input: ThinkPad Extra Buttons as /devices/virtual/input/input9
[ 11.378438] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 11.378441] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 11.378648] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.378687] iwlagn 0000:03:00.0: setting latency timer to 64
[ 11.378781] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 11.419338] iwlagn: Tunable channels: 13 802.11bg, 12 802.11a channels
[ 11.419455] iwlagn 0000:03:00.0: irq 2299 for MSI/MSI-X
[ 11.421774] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.588652] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.607886] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input10
[ 11.691372] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 11.693733] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 11.694731] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 11.695548] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.696578] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 11.854602] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.854607] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 11.854697] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.400324] lp: driver loaded but no devices found
[ 12.535780] Adding 2120572k swap on /dev/sda3. Priority:-1 extents:1 across:2120572k
[ 13.074939] EXT4 FS on sda4, internal journal on sda4:8
[ 14.207980] type=1505 audit(1247906683.348:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2182
[ 14.257564] type=1505 audit(1247906683.400:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2186
[ 14.257670] type=1505 audit(1247906683.400:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2186
[ 14.257716] type=1505 audit(1247906683.400:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2186
[ 14.257755] type=1505 audit(1247906683.400:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2186
[ 14.395308] type=1505 audit(1247906683.536:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2191
[ 14.395486] type=1505 audit(1247906683.536:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2191
[ 14.424798] type=1505 audit(1247906683.568:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2195
[ 16.976902] Bridge firewalling registered
[ 17.027194] virbr0: starting userspace STP failed, starting kernel STP
[ 17.257170] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.421406] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.421604] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 17.421607] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 17.421609] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 20.974409] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.974412] Bluetooth: BNEP filters: protocol multicast
[ 21.992981] ppdev: user-space parallel port driver
[ 22.364565] [drm] Initialized drm 1.1.0 20060810
[ 22.384622] pci 0000:00:02.0: power state changed by ACPI to D0
[ 22.384631] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.384636] pci 0000:00:02.0: setting latency timer to 64
[ 22.384796] pci 0000:00:02.0: irq 2298 for MSI/MSI-X
[ 22.384886] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 25.992386] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 26.048202] e1000e 0000:00:19.0: irq 2300 for MSI/MSI-X
[ 26.048597] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.049498] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 26.206949] iwlagn: Radio disabled by HW RF Kill switch
[ 26.209558] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.124048] virbr0: no IPv6 routers present
[ 27.580935] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 27.580939] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 27.581176] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.140055] eth0: no IPv6 routers present
[ 289.604954] input: Virtual ThinkFinger Keyboard as /devices/virtual/input/input11
[ 363.410222] input: Virtual ThinkFinger Keyboard as /devices/virtual/input/input12
[ 651.000311] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 1143.926544] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1
[ 1143.930949] mtrr: no MTRR for e0000000,10000000 found
[ 1145.784320] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 1146.485251] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 1151.161588] input: Virtual ThinkFinger Keyboard as /devices/virtual/input/input13
[ 1157.284101] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 1157.317186] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 1157.359095] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 1157.400845] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 1157.430638] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 1157.580617] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 3106.610815] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1
[ 3106.623853] mtrr: no MTRR for e0000000,10000000 found
[ 3108.426678] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 3109.044243] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 3112.852186] input: Virtual ThinkFinger Keyboard as /devices/virtual/input/input14
[ 3118.922764] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 3118.950137] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 3118.988848] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 3119.027268] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 3119.062740] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 3119.212653] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 5790.227848] input: Virtual ThinkFinger Keyboard as /devices/virtual/input/input15
[ 5863.064120] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 7278.720561] usb 5-1: USB disconnect, address 2
[ 7284.271053] usb 4-1.3: new low speed USB device using uhci_hcd and address 4
[ 7284.412964] usb 4-1.3: configuration #1 chosen from 1 choice
[ 7284.442172] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3:1.0/input/input16
[ 7284.460770] generic-usb 0003:046D:C019.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.1-1.3/input0
[ 7311.729030] input: Virtual ThinkFinger Keyboard as /devices/virtual/input/input17
----------------------------------------------------------------------
--
Adam
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
