Hi,
I've a board using an isp1761 and a recent kernel. When I'm connecting
an WLAN-stick, everything goes well, but the driver can't read using
BULKs.
instead the ISP complains about reloading the PTD over and over again.
Every other communication between the host and the stick seems to be
well.
I digged into the code and everything seems to be set up correctly. So
does anyone has any clues?
attached is a log of the procedere. The messages appear from the point,
where
the transfer should be started.
best regards
# usb 1-1.3: new high speed USB device using isp176x and address 3
usb 1-1.3: New USB device found, idVendor=1737, idProduct=0071
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: Dual-Band Wireless-N USB Network Adapter
usb 1-1.3: Manufacturer: Cisco-Linksys LLC
usb 1-1.3: configuration #1 chosen from 1 choice
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 1600, rf: 0002, rev: 28720202.
Registered led device: rt2800usb-phy0::radio
Registered led device: rt2800usb-phy0::assoc
Registered led device: rt2800usb-phy0::quality
# ifconfig wlan0 up
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'.
rt2800usb 1-1.3:1.0: firmware: requesting rt2870.bin
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.2.
now check it!
we have chipset 2872 so we use offset 0
Now in step initialize firmware
End of load Firmware
loaded firmware! (0)
pre status = rt2x00queue_initialize(rt2x00dev);
device initialized!
firmware initialized ! (0)
cleaning queues
<3>Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
reached line 227 of drivers/net/wireless/rt2x00/rt2800usb.c
<3>Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
reached line 1903 of drivers/net/wireless/rt2x00/rt2800usb.c
reached line 1925 of drivers/net/wireless/rt2x00/rt2800usb.c
<3>Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
Reloading ptd 93408960/93a073a0... qh 93409410 readed: 0 of 3860 done: 00000002 cur: 00000001
