[PATCH] usb: r8a66597-hcd platform data on_chip support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Magnus Damm <damm@xxxxxxxxxx>

Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.

Signed-off-by: Magnus Damm <damm@xxxxxxxxxx>
---

 Applies on top of the dev_pm_ops patch.

 arch/sh/boards/mach-se/7724/setup.c    |    1 
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c |    2 
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c |    2 
 drivers/usb/host/Kconfig               |    7 -
 drivers/usb/host/r8a66597-hcd.c        |  187 ++++++++++++++++++--------------
 drivers/usb/host/r8a66597.h            |   78 ++++++-------
 include/linux/usb/r8a66597.h           |    3 
 7 files changed, 148 insertions(+), 132 deletions(-)

--- 0001/arch/sh/boards/mach-se/7724/setup.c
+++ work/arch/sh/boards/mach-se/7724/setup.c	2009-07-17 02:12:24.000000000 +0900
@@ -304,6 +304,7 @@ static struct platform_device sh_eth_dev
 };
 
 static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
 };
 
 static struct resource sh7724_usb0_host_resources[] = {
--- 0001/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7366.c	2009-07-17 02:11:44.000000000 +0900
@@ -40,7 +40,7 @@ static struct platform_device iic_device
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource usb_host_resources[] = {
--- 0001/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7723.c	2009-07-17 02:12:21.000000000 +0900
@@ -398,7 +398,7 @@ static struct platform_device rtc_device
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource sh7723_usb_host_resources[] = {
--- 0001/drivers/usb/host/Kconfig
+++ work/drivers/usb/host/Kconfig	2009-07-17 02:14:41.000000000 +0900
@@ -335,13 +335,6 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
-config SUPERH_ON_CHIP_R8A66597
-	boolean "Enable SuperH on-chip R8A66597 USB"
-	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
-	help
-	   This driver enables support for the on-chip R8A66597 in the
-	   SH7366, SH7723 and SH7724 processors.
-
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
--- 0009/drivers/usb/host/r8a66597-hcd.c
+++ work/drivers/usb/host/r8a66597-hcd.c	2009-07-17 02:09:41.000000000 +0900
@@ -92,43 +92,43 @@ static int r8a66597_clock_enable(struct 
 	u16 tmp;
 	int i = 0;
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#if defined(CONFIG_HAVE_CLK)
-	clk_enable(r8a66597->clk);
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		clk_enable(r8a66597->clk);
 #endif
-	do {
-		r8a66597_write(r8a66597, SCKE, SYSCFG0);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 1000) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & SCKE) != SCKE);
-	r8a66597_write(r8a66597, 0x04, 0x02);
-#else
-	do {
-		r8a66597_write(r8a66597, USBE, SYSCFG0);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 1000) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & USBE) != USBE);
-	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
-	r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
-			SYSCFG0);
+		do {
+			r8a66597_write(r8a66597, SCKE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+		r8a66597_write(r8a66597, 0x04, 0x02);
+	} else {
+		do {
+			r8a66597_write(r8a66597, USBE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & USBE) != USBE);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata),
+			      XTAL, SYSCFG0);
 
-	i = 0;
-	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
-	do {
-		msleep(1);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 500) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & SCKE) != SCKE);
-#endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
+		i = 0;
+		r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+		do {
+			msleep(1);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 500) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+	}
 
 	return 0;
 }
@@ -137,15 +137,16 @@ static void r8a66597_clock_disable(struc
 {
 	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
 	udelay(1);
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#if defined(CONFIG_HAVE_CLK)
-	clk_disable(r8a66597->clk);
-#endif
-#else
-	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
-	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
-	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		clk_disable(r8a66597->clk);
 #endif
+	} else {
+		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+	}
 }
 
 static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
@@ -206,7 +207,7 @@ static int enable_controller(struct r8a6
 
 	r8a66597_bset(r8a66597, SIGNE | SACKE, INTENB1);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_enable_port(r8a66597, port);
 
 	return 0;
@@ -219,7 +220,7 @@ static void disable_controller(struct r8
 	r8a66597_write(r8a66597, 0, INTENB0);
 	r8a66597_write(r8a66597, 0, INTSTS0);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_disable_port(r8a66597, port);
 
 	r8a66597_clock_disable(r8a66597);
@@ -250,11 +251,12 @@ static int is_hub_limit(char *devpath)
 	return ((strlen(devpath) >= 4) ? 1 : 0);
 }
 
-static void get_port_number(char *devpath, u16 *root_port, u16 *hub_port)
+static void get_port_number(struct r8a66597 *r8a66597,
+			    char *devpath, u16 *root_port, u16 *hub_port)
 {
 	if (root_port) {
 		*root_port = (devpath[0] & 0x0F) - 1;
-		if (*root_port >= R8A66597_MAX_ROOT_HUB)
+		if (*root_port >= r8a66597->max_root_hub)
 			printk(KERN_ERR "r8a66597: Illegal root port number.\n");
 	}
 	if (hub_port)
@@ -356,7 +358,8 @@ static int make_r8a66597_device(struct r
 	INIT_LIST_HEAD(&dev->device_list);
 	list_add_tail(&dev->device_list, &r8a66597->child_device);
 
-	get_port_number(urb->dev->devpath, &dev->root_port, &dev->hub_port);
+	get_port_number(r8a66597, urb->dev->devpath,
+			&dev->root_port, &dev->hub_port);
 	if (!is_child_device(urb->dev->devpath))
 		r8a66597->root_hub[dev->root_port].dev = dev;
 
@@ -421,7 +424,7 @@ static void free_usb_address(struct r8a6
 	list_del(&dev->device_list);
 	kfree(dev);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		if (r8a66597->root_hub[port].dev == dev) {
 			r8a66597->root_hub[port].dev = NULL;
 			break;
@@ -496,10 +499,20 @@ static void r8a66597_pipe_toggle(struct 
 		r8a66597_bset(r8a66597, SQCLR, pipe->pipectr);
 }
 
+static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip)
+		return MBW_32;
+	else
+		return MBW_16;
+}
+
 /* this function must be called with interrupt disabled */
 static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum)
 {
-	r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
+	unsigned short mbw = mbw_value(r8a66597);
+
+	r8a66597_mdfy(r8a66597, mbw | pipenum, mbw | CURPIPE, CFIFOSEL);
 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
 }
 
@@ -507,11 +520,13 @@ static inline void cfifo_change(struct r
 static inline void fifo_change_from_pipe(struct r8a66597 *r8a66597,
 					 struct r8a66597_pipe *pipe)
 {
+	unsigned short mbw = mbw_value(r8a66597);
+
 	cfifo_change(r8a66597, 0);
-	r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D0FIFOSEL);
-	r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D1FIFOSEL);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D0FIFOSEL);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D1FIFOSEL);
 
-	r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum, MBW | CURPIPE,
+	r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, mbw | CURPIPE,
 		      pipe->fifosel);
 	r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum);
 }
@@ -743,9 +758,13 @@ static void enable_r8a66597_pipe_dma(str
 				     struct r8a66597_pipe *pipe,
 				     struct urb *urb)
 {
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	int i;
 	struct r8a66597_pipe_info *info = &pipe->info;
+	unsigned short mbw = mbw_value(r8a66597);
+
+	/* pipe dma is only for external controlles */
+	if (r8a66597->pdata->on_chip)
+		return;
 
 	if ((pipe->info.pipenum != 0) && (info->type != R8A66597_INT)) {
 		for (i = 0; i < R8A66597_MAX_DMA_CHANNEL; i++) {
@@ -764,8 +783,8 @@ static void enable_r8a66597_pipe_dma(str
 			set_pipe_reg_addr(pipe, i);
 
 			cfifo_change(r8a66597, 0);
-			r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum,
-				      MBW | CURPIPE, pipe->fifosel);
+			r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum,
+				      mbw | CURPIPE, pipe->fifosel);
 
 			r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE,
 					  pipe->info.pipenum);
@@ -773,7 +792,6 @@ static void enable_r8a66597_pipe_dma(str
 			break;
 		}
 	}
-#endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
 }
 
 /* this function must be called with interrupt disabled */
@@ -1770,7 +1788,7 @@ static void r8a66597_timer(unsigned long
 
 	spin_lock_irqsave(&r8a66597->lock, flags);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_root_hub_control(r8a66597, port);
 
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
@@ -1808,7 +1826,7 @@ static void set_address_zero(struct r8a6
 	u16 root_port, hub_port;
 
 	if (usb_address == 0) {
-		get_port_number(urb->dev->devpath,
+		get_port_number(r8a66597, urb->dev->devpath,
 				&root_port, &hub_port);
 		set_devadd_reg(r8a66597, 0,
 			       get_r8a66597_usb_speed(urb->dev->speed),
@@ -2083,7 +2101,7 @@ static int r8a66597_hub_status_data(stru
 
 	*buf = 0;	/* initialize (no change) */
 
-	for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++) {
+	for (i = 0; i < r8a66597->max_root_hub; i++) {
 		if (r8a66597->root_hub[i].port & 0xffff0000)
 			*buf |= 1 << (i + 1);
 	}
@@ -2098,11 +2116,11 @@ static void r8a66597_hub_descriptor(stru
 {
 	desc->bDescriptorType = 0x29;
 	desc->bHubContrCurrent = 0;
-	desc->bNbrPorts = R8A66597_MAX_ROOT_HUB;
+	desc->bNbrPorts = r8a66597->max_root_hub;
 	desc->bDescLength = 9;
 	desc->bPwrOn2PwrGood = 0;
 	desc->wHubCharacteristics = cpu_to_le16(0x0011);
-	desc->bitmap[0] = ((1 << R8A66597_MAX_ROOT_HUB) - 1) << 1;
+	desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1;
 	desc->bitmap[1] = ~0;
 }
 
@@ -2130,7 +2148,7 @@ static int r8a66597_hub_control(struct u
 		}
 		break;
 	case ClearPortFeature:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		if (wLength != 0)
 			goto error;
@@ -2163,12 +2181,12 @@ static int r8a66597_hub_control(struct u
 		*buf = 0x00;
 		break;
 	case GetPortStatus:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		*(__le32 *)buf = cpu_to_le32(rh->port);
 		break;
 	case SetPortFeature:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		if (wLength != 0)
 			goto error;
@@ -2217,7 +2235,7 @@ static int r8a66597_bus_suspend(struct u
 
 	dbg("%s", __func__);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
@@ -2248,7 +2266,7 @@ static int r8a66597_bus_resume(struct us
 
 	dbg("%s", __func__);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
@@ -2315,7 +2333,7 @@ static int r8a66597_suspend(struct devic
 
 	disable_controller(r8a66597);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
 		rh->port = 0x00000000;
@@ -2355,8 +2373,9 @@ static int __init_or_module r8a66597_rem
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
 	iounmap((void *)r8a66597->reg);
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	clk_put(r8a66597->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
 #endif
 	usb_put_hcd(hcd);
 	return 0;
@@ -2364,7 +2383,7 @@ static int __init_or_module r8a66597_rem
 
 static int __devinit r8a66597_probe(struct platform_device *pdev)
 {
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
 #endif
 	struct resource *res = NULL, *ires;
@@ -2426,15 +2445,20 @@ static int __devinit r8a66597_probe(stru
 	r8a66597->pdata = pdev->dev.platform_data;
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
-	r8a66597->clk = clk_get(&pdev->dev, clk_name);
-	if (IS_ERR(r8a66597->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
-		ret = PTR_ERR(r8a66597->clk);
-		goto clean_up2;
-	}
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+		r8a66597->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(r8a66597->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(r8a66597->clk);
+			goto clean_up2;
+		}
 #endif
+		r8a66597->max_root_hub = 1;
+	} else
+		r8a66597->max_root_hub = 2;
 
 	spin_lock_init(&r8a66597->lock);
 	init_timer(&r8a66597->rh_timer);
@@ -2464,8 +2488,9 @@ static int __devinit r8a66597_probe(stru
 	return 0;
 
 clean_up3:
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	clk_put(r8a66597->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
 clean_up2:
 #endif
 	usb_put_hcd(hcd);
--- 0001/drivers/usb/host/r8a66597.h
+++ work/drivers/usb/host/r8a66597.h	2009-07-17 02:03:13.000000000 +0900
@@ -26,7 +26,7 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
 #endif
 
@@ -193,13 +193,9 @@
 #define	REW		0x4000	/* b14: Buffer rewind */
 #define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
 #define	DREQE		0x1000	/* b12: DREQ output enable */
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define	MBW		0x0800
-#else
-#define	MBW		0x0400	/* b10: Maximum bit width for FIFO access */
-#endif
 #define	  MBW_8		 0x0000	  /*  8bit */
 #define	  MBW_16	 0x0400	  /* 16bit */
+#define	  MBW_32	 0x0800   /* 32bit */
 #define	BIGEND		0x0100	/* b8: Big endian mode */
 #define	  BYTE_LITTLE	 0x0000		/* little dendian */
 #define	  BYTE_BIG	 0x0100		/* big endifan */
@@ -405,11 +401,7 @@
 #define R8A66597_MAX_NUM_PIPE		10
 #define R8A66597_BUF_BSIZE		8
 #define R8A66597_MAX_DEVICE		10
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define R8A66597_MAX_ROOT_HUB		1
-#else
 #define R8A66597_MAX_ROOT_HUB		2
-#endif
 #define R8A66597_MAX_SAMPLING		5
 #define R8A66597_RH_POLL_TIME		10
 #define R8A66597_MAX_DMA_CHANNEL	2
@@ -487,7 +479,7 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	unsigned long reg;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
 	struct r8a66597_platdata	*pdata;
@@ -504,6 +496,7 @@ struct r8a66597 {
 	unsigned short interval_map;
 	unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
 	unsigned char dma_map;
+	unsigned int max_root_hub;
 
 	struct list_head child_device;
 	unsigned long child_connect_map[4];
@@ -550,21 +543,22 @@ static inline void r8a66597_read_fifo(st
 				      unsigned long offset, u16 *buf,
 				      int len)
 {
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 
-	count = len / 4;
-	insl(fifoaddr, buf, count);
-
-	if (len & 0x00000003) {
-		unsigned long tmp = inl(fifoaddr);
-		memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		insl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			unsigned long tmp = inl(fifoaddr);
+			memcpy((unsigned char *)buf + count * 4, &tmp,
+			       len & 0x03);
+		}
+	} else {
+		len = (len + 1) / 2;
+		insw(fifoaddr, buf, len);
 	}
-#else
-	len = (len + 1) / 2;
-	insw(r8a66597->reg + offset, buf, len);
-#endif
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
@@ -578,33 +572,33 @@ static inline void r8a66597_write_fifo(s
 				       int len)
 {
 	unsigned long fifoaddr = r8a66597->reg + offset;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long count;
 	unsigned char *pb;
 	int i;
 
-	count = len / 4;
-	outsl(fifoaddr, buf, count);
-
-	if (len & 0x00000003) {
-		pb = (unsigned char *)buf + count * 4;
-		for (i = 0; i < (len & 0x00000003); i++) {
-			if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-				outb(pb[i], fifoaddr + i);
-			else
-				outb(pb[i], fifoaddr + 3 - i);
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		outsl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+					outb(pb[i], fifoaddr + i);
+				else
+					outb(pb[i], fifoaddr + 3 - i);
+			}
 		}
-	}
-#else
-	int odd = len & 0x0001;
+	} else {
+		int odd = len & 0x0001;
 
-	len = len / 2;
-	outsw(fifoaddr, buf, len);
-	if (unlikely(odd)) {
-		buf = &buf[len];
-		outb((unsigned char)*buf, fifoaddr);
+		len = len / 2;
+		outsw(fifoaddr, buf, len);
+		if (unlikely(odd)) {
+			buf = &buf[len];
+			outb((unsigned char)*buf, fifoaddr);
+		}
 	}
-#endif
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
--- 0001/include/linux/usb/r8a66597.h
+++ work/include/linux/usb/r8a66597.h	2009-07-17 01:39:37.000000000 +0900
@@ -31,6 +31,9 @@ struct r8a66597_platdata {
 	/* This ops can controll port power instead of DVSTCTR register. */
 	void (*port_power)(int port, int power);
 
+	/* set one = on chip controller, set zero = external controller */
+	unsigned	on_chip:1;
+
 	/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
 	unsigned	xtal:2;
 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux