Re: [PATCH v3 5/6] arm64: dtsi: imx8mp: add usb nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 22, 2020 at 06:46:51PM +0800, Li Jun wrote:
> imx8mp integrates 2 identical dwc3 based USB3 controllers and
> Synopsys phys, each instance has additional wakeup logic to
> support low power mode, so the glue layer need a node with dwc3
> core sub node.
> 
> Signed-off-by: Li Jun <jun.li@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 88 +++++++++++++++++++++++++++++++
>  1 file changed, 88 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 9de2aa1..1b7ed4c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +		usb3_1: usb@32f10108 {
> +			compatible = "fsl,imx8mp-dwc3";
> +			reg = <0x32f10108 0x8>;
> +			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> +				 <&clk IMX8MP_CLK_USB_ROOT>;
> +			clock-names = "hsio", "suspend";
> +			assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI_SRC>;

In Linux-5.9-rc6 this clock doesn't exist anymore. Should be
IMX8MP_CLK_HSIO_AXI

> +			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> +			assigned-clock-rates = <500000000>;
> +			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			status = "disabled";
> +
> +			usb_dwc3_1: dwc3@38200000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x38200000 0x10000>;
> +				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> +					 <&clk IMX8MP_CLK_USB_CORE_REF>,
> +					 <&clk IMX8MP_CLK_USB_ROOT>;
> +				clock-names = "bus_early", "ref", "suspend";
> +				assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> +				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> +				assigned-clock-rates = <500000000>;
> +				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb3_phy1>, <&usb3_phy1>;
> +				phy-names = "usb2-phy", "usb3-phy";
> +				snps,dis-u2-freeclk-exists-quirk;
> +				xhci-64bit-support-disable;
> +				status = "disabled";

Does it make sense for a board to enable the parent node and leave this
one disabled? If not you can drop this status = "disabled" here.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux