On Thu, 17 Sep 2020 11:46:21 -0700, Matthias Kaehlcke wrote: > Onboard USB hubs need to be powered and may require initiaization of > other resources (like GPIOs or clocks) to work properly. This adds > a device tree binding for these hubs. > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> > --- > > Changes in v2: > - removed 'wakeup-source' and 'power-off-in-suspend' properties > - consistently use spaces for indentation in example > > .../bindings/usb/onboard_usb_hub.yaml | 56 +++++++++++++++++++ > 1 file changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml > My bot found errors running 'make dt_binding_check' on your patch: Error: Documentation/devicetree/bindings/usb/onboard_usb_hub.example.dts:24.9-20 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/usb/onboard_usb_hub.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1366: dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1366361 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
