Hi,
Manish Narani <MNARANI@xxxxxxxxxx> writes:
>> -----Original Message-----
>> From: Felipe Balbi <balbi@xxxxxxxxxx>
>> Sent: Tuesday, September 1, 2020 5:45 PM
>>
>> >> > + goto err;
>> >> > + }
>> >> > +
>> >> > + ret = dwc3_xlnx_rst_assert(priv_data->apbrst);
>> >> > + if (ret < 0) {
>> >> > + dev_err(dev, "%s: %d: Failed to assert reset\n",
>> >> > + __func__, __LINE__);
>> >>
>> >> dev_err(dev, "Failed to assert APB reset\n");
>> >>
>> >> > + goto err;
>> >> > + }
>> >> > +
>> >> > + ret = phy_init(priv_data->usb3_phy);
>> >>
>> >> dwc3 core should be handling this already
>> >
>> > The USB controller used in Xilinx ZynqMP platform uses xilinx GT phy
>> > which has 4 GT lanes and can used by 4 peripherals at a time.
>>
>> At the same time or are they mutually exclusive?
>
> The lanes are mutually exclusive.
Thank you for confirming :-)
> [...]
>> >> > + if (ret < 0) {
>> >> > + dev_err(dev, "%s: %d: Failed to release reset\n",
>> >> > + __func__, __LINE__);
>> >> > + goto err;
>> >> > + }
>> >> > +
>> >> > + /* Set PIPE power present signal */
>> >> > + writel(PIPE_POWER_ON, priv_data->regs + PIPE_POWER_OFFSET);
>> >> > +
>> >> > + /* Clear PIPE CLK signal */
>> >> > + writel(PIPE_CLK_OFF, priv_data->regs + PIPE_CLK_OFFSET);
>> >>
>> >> shouldn't this be hidden under clk_enable()?
>> >
>> > Though its naming suggests something related to clock framework, it is
>> > a register in the Xilinx USB controller space which configures the
>> > PIPE clock coming from Serdes.
>>
>> PIPE clock is a clock. It just so happens that the source is the PHY
>> itself.
>
> This bit is used to choose between PIPE clock coming from SerDes
> and the Suspend Clock. When the controller is out of reset, this bit
> needs to be reset in order to make the USB controller work. This
> register is added in Xilinx USB controller register space. I will
> add more description about the same in v2.
Aha! That clarifies. It's just a clock selection from clocks that are
generated elsewhere :-) I guess a clk driver would be overkill, indeed.
Thanks for explaining. Could you add some of this information to commit
log, then?
cheers
--
balbi
Attachment:
signature.asc
Description: PGP signature
