Hi Felipe, In this series, it adds cdns3 runtime PM support, and verified at NXP i.MX8QM and i.MX8QXP platforms. Changes for v8: - Add judgement for zero valued wakeup-irq number, and using devm_request_irq for wakeup interrupt handler request [Patch 2/3] - Remove unrelated changes, and using const for of_dev_auxdata. [Patch 3/3] Changes for v7: - Fix one coding style issue [Patch 2/3] - Fix one sparese isse Reported-by: kernel test robot <lkp@xxxxxxxxx> [Patch 3/3] Changes for v6: - Add Pawel's reviewed-by - Remove xhci-plat patches, which was sent by xhci patch series [1] - Rebased on the newest usb/next Changes for v5: - Address Greg's comments for more obvious PHY power controller APIs [Patch 1/2] - One build warning from kernel test robot Changes for v4: - Address Jun Li's comments for cdns3 core changes [Patch 2] - Some small fixes for cdns3-imx for CLK_125_REQ bit - Rebase the latest usb-next Changes for v3: Add Jun Li’s reviewed-by [Patch 1 and Patch 6] Add Mathias’s acked-by [Patch 4-6] Some wakeup logic improvement [Patch 2] Add dedicated wakeup interrupt for core, and improve the commit log [Patch] Fix build error found by kbuild test robot [Patch 3] Using xhci_plat_priv quirk for skip PHY initialization [patch 7, patch 9] Some other typo and tiny improvements Changes for v2: - Add the 1st patch. Without it, the build on the usb-next will fail. - Change the subject for cover letter a little to reflect all contents. [1] https://www.spinics.net/lists/linux-usb/msg199399.html Peter Chen (3): usb: cdns3: introduce set_phy_power_on{off} APIs usb: cdns3: add runtime PM support usb: cdns3: imx: add glue layer runtime pm implementation drivers/usb/cdns3/cdns3-imx.c | 191 ++++++++++++++++++++++++++++++++- drivers/usb/cdns3/core.c | 196 ++++++++++++++++++++++++++++------ drivers/usb/cdns3/core.h | 16 +++ drivers/usb/cdns3/drd.c | 3 + drivers/usb/cdns3/gadget.c | 4 + drivers/usb/cdns3/host.c | 7 ++ 6 files changed, 380 insertions(+), 37 deletions(-) -- 2.17.1
