From: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@xxxxxxx>
On some platform of AMD, S3 fails with HCE and SRE errors.To fix this,
sparse controller enable bit has to be disabled.
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@xxxxxxx>
---
drivers/usb/host/xhci-pci.c | 12 ++++++++++++
drivers/usb/host/xhci.h | 1 +
2 files changed, 13 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 3feaafebfe58..865a16e6c1ed 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -160,6 +160,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
(pdev->device == 0x15e0 || pdev->device == 0x15e1))
xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5)
+ xhci->quirks |= XHCI_DISABLE_SPARSE;
+
if (pdev->vendor == PCI_VENDOR_ID_AMD)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
@@ -371,6 +374,15 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* USB 2.0 roothub is stored in the PCI device now. */
hcd = dev_get_drvdata(&dev->dev);
xhci = hcd_to_xhci(hcd);
+
+ if (xhci->quirks & XHCI_DISABLE_SPARSE) {
+ u32 reg;
+
+ reg = readl(hcd->regs + 0xC12C);
+ reg &= ~BIT(17);
+ writel(reg, hcd->regs + 0xC12C);
+ }
+
xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
pci_name(dev), hcd);
if (!xhci->shared_hcd) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ea1754f185a2..ea966d70f1ee 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1874,6 +1874,7 @@ struct xhci_hcd {
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
+#define XHCI_DISABLE_SPARSE BIT_ULL(37)
unsigned int num_active_eps;
unsigned int limit_active_eps;
--
2.25.1
