Jerome Brunet <jbrunet@xxxxxxxxxxxx> writes: > On Mon 13 Jul 2020 at 18:05, Dan Robertson <dan@xxxxxxxxxxxxxxx> wrote: > >> The reset is a shared reset line, but reset_control_reset is still used >> and reset_control_deassert is not guaranteed to have been called before >> the first reset_control_assert call. When suspending the following >> warning may be seen: > > And now the same type of warning maybe seen on boot. This is > happening for me on the libretech-cc (s905x - gxl). > > [ 1.863469] ------------[ cut here ]------------ > [ 1.867914] WARNING: CPU: 1 PID: 16 at drivers/reset/core.c:309 reset_control_reset+0x130/0x150 > [ 1.876525] Modules linked in: > [ 1.879548] CPU: 1 PID: 16 Comm: kworker/1:0 Not tainted 5.9.0-rc1-00167-ga2e4e3a34775 #64 > [ 1.887737] Hardware name: Libre Computer AML-S905X-CC V2 (DT) > [ 1.893525] Workqueue: events deferred_probe_work_func > [ 1.898607] pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--) > [ 1.904126] pc : reset_control_reset+0x130/0x150 > [ 1.908700] lr : phy_meson_gxl_usb2_init+0x24/0x70 > [ 1.913439] sp : ffff8000123ebad0 > [ 1.916717] x29: ffff8000123ebad0 x28: 0000000000000000 > [ 1.921978] x27: ffff00007c4b1ac8 x26: ffff00007c4b1ab0 > [ 1.927239] x25: ffff00007fc149b0 x24: ffff00007c4b1ab0 > [ 1.932500] x23: ffff00007cd03800 x22: ffff800011fb9000 > [ 1.937761] x21: ffff00007c60db08 x20: ffff00007c468a80 > [ 1.943023] x19: ffff00007c466b00 x18: ffffffffffffffff > [ 1.948284] x17: 0000000000000000 x16: 000000000000000e > [ 1.953545] x15: ffff800011fb9948 x14: ffffffffffffffff > [ 1.958806] x13: ffffffff00000000 x12: ffffffffffffffff > [ 1.964068] x11: 0000000000000020 x10: 7f7f7f7f7f7f7f7f > [ 1.969329] x9 : 78676f2c32617274 x8 : 0000000000000000 > [ 1.974590] x7 : ffffffffffffffff x6 : 0000000000000000 > [ 1.979851] x5 : 0000000000000000 x4 : 0000000000000000 > [ 1.985112] x3 : 0000000000000000 x2 : ffff8000107aa370 > [ 1.990374] x1 : 0000000000000001 x0 : 0000000000000001 > [ 1.995636] Call trace: > [ 1.998054] reset_control_reset+0x130/0x150 > [ 2.002279] phy_meson_gxl_usb2_init+0x24/0x70 > [ 2.006677] phy_init+0x78/0xd0 > [ 2.009784] dwc3_meson_g12a_probe+0x2c8/0x560 > [ 2.014182] platform_drv_probe+0x58/0xa8 > [ 2.018149] really_probe+0x114/0x3d8 > [ 2.021770] driver_probe_device+0x5c/0xb8 > [ 2.025824] __device_attach_driver+0x98/0xb8 > [ 2.030138] bus_for_each_drv+0x74/0xd8 > [ 2.033933] __device_attach+0xec/0x148 > [ 2.037726] device_initial_probe+0x24/0x30 > [ 2.041868] bus_probe_device+0x9c/0xa8 > [ 2.045663] deferred_probe_work_func+0x7c/0xb8 > [ 2.050150] process_one_work+0x1f0/0x4b0 > [ 2.054115] worker_thread+0x210/0x480 > [ 2.057824] kthread+0x158/0x160 > [ 2.061017] ret_from_fork+0x10/0x18 > [ 2.064550] ---[ end trace 94d737efe593c6f6 ]--- > [ 2.069158] phy phy-d0078000.phy.0: phy init failed --> -22 > [ 2.074858] dwc3-meson-g12a: probe of d0078080.usb failed with error -22 > > This breaks USB on this device. reverting the change brings it back. [...] > In the meantime, I think this change should be reverted. A warning on > suspend seems less critical than a regression breaking USB completly. Fully agree. Phillip, can you please revert this patch until the right solution is found? Boot failure is much worse than a suspend warning. Kevin
