[PATCH 1/1] usb: dwc3: meson-g12a: fix shared reset control use

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The reset is a shared reset line, but reset_control_reset is still used
and reset_control_deassert is not guaranteed to have been called before
the first reset_control_assert call. When suspending the following
warning may be seen:

WARNING: CPU: 1 PID: 5530 at drivers/reset/core.c:355 reset_control_assert+0x184/0x19c
Hardware name: Hardkernel ODROID-N2 (DT)
[..]
pc : reset_control_assert+0x184/0x19c
lr : dwc3_meson_g12a_suspend+0x68/0x7c
[..]
Call trace:
 reset_control_assert+0x184/0x19c
 dwc3_meson_g12a_suspend+0x68/0x7c
 platform_pm_suspend+0x28/0x54
 __device_suspend+0x590/0xabc
 dpm_suspend+0x104/0x404
 dpm_suspend_start+0x84/0x1bc
 suspend_devices_and_enter+0xc4/0x4fc
 pm_suspend+0x198/0x2d4

Fixes: 6d9fa35a347a87 ("usb: dwc3: meson-g12a: get the reset as shared")
Signed-off-by: Dan Robertson <dan@xxxxxxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 1f7f4d88ed9d..88b75b5a039c 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -737,13 +737,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 		goto err_disable_clks;
 	}
 
-	ret = reset_control_reset(priv->reset);
+	ret = reset_control_deassert(priv->reset);
 	if (ret)
-		goto err_disable_clks;
+		goto err_assert_reset;
 
 	ret = dwc3_meson_g12a_get_phys(priv);
 	if (ret)
-		goto err_disable_clks;
+		goto err_assert_reset;
 
 	ret = priv->drvdata->setup_regmaps(priv, base);
 	if (ret)
@@ -752,7 +752,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	if (priv->vbus) {
 		ret = regulator_enable(priv->vbus);
 		if (ret)
-			goto err_disable_clks;
+			goto err_assert_reset;
 	}
 
 	/* Get dr_mode */
@@ -765,13 +765,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = priv->drvdata->usb_init(priv);
 	if (ret)
-		goto err_disable_clks;
+		goto err_assert_reset;
 
 	/* Init PHYs */
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_init(priv->phys[i]);
 		if (ret)
-			goto err_disable_clks;
+			goto err_assert_reset;
 	}
 
 	/* Set PHY Power */
@@ -809,6 +809,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_exit(priv->phys[i]);
 
+err_assert_reset:
+	reset_control_assert(priv->reset);
+
 err_disable_clks:
 	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
 				   priv->drvdata->clks);




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux