On 20-04-07 22:00:37, Michał Mirosław wrote: > On Tue, Apr 07, 2020 at 03:12:36AM +0000, Peter Chen wrote: > > On 20-04-04 02:00:06, Michał Mirosław wrote: > > > Allow to cut down on driver size for embedded config. > > > > > > Signed-off-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx> > > > --- > > > drivers/usb/chipidea/Kconfig | 37 ++++++++++++++++++++++++----------- > > > drivers/usb/chipidea/Makefile | 12 +++++------- > > > 2 files changed, 31 insertions(+), 18 deletions(-) > > > > > > diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig > > > index d53db520e209..8bafcfc6080d 100644 > > > --- a/drivers/usb/chipidea/Kconfig > > > +++ b/drivers/usb/chipidea/Kconfig > > > @@ -18,17 +18,6 @@ config USB_CHIPIDEA > > > > > > if USB_CHIPIDEA > > > > > > -config USB_CHIPIDEA_OF > > > - tristate > > > - depends on OF > > > - default USB_CHIPIDEA > > > - > > > -config USB_CHIPIDEA_PCI > > > - tristate > > > - depends on USB_PCI > > > - depends on NOP_USB_XCEIV > > > - default USB_CHIPIDEA > > > - > > > config USB_CHIPIDEA_UDC > > > bool "ChipIdea device controller" > > > depends on USB_GADGET > > > @@ -43,4 +32,30 @@ config USB_CHIPIDEA_HOST > > > help > > > Say Y here to enable host controller functionality of the > > > ChipIdea driver. > > > + > > > +config USB_CHIPIDEA_PCI > > > + tristate "Enable PCI glue driver" if EMBEDDED > [...] > > Why depends on EMBEDDED for this driver? Not everyone needs this > > configuration. > > This does not make the driver depend on EMBEDDED, only the prompts are. > By default (without CONFIG_EMBEDDED) you will have all glue layers built > if you enable the driver. I can remove the 'if EMBEDDED', but > I suppose those options are only relevant for people building for > resource-constrained systems, so would have EMBEDDED enabled anyway. > Make sense. I applied this series, thanks. -- Thanks, Peter Chen
