From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
Currently the string formatting is mixing up the offset of ret and
len. Re-work the code to use just len, remove ret and use scnprintf
instead of snprintf and len position accumulation where required.
Remove the -ve return check since scnprintf never returns a failure
-ve size. Also break overly long lines to clean up checkpatch
warnings.
Addresses-Coverity: ("Unused value")
Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat")
Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
V2: rework original fix, remove strlens and use scnprintf as helpfully
suggested by Dan Carpenter. Change the subject line to match the
changes to the V2 of the fix.
---
drivers/usb/dwc3/debug.h | 39 +++++++++++++++------------------------
1 file changed, 15 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index e56beb9d1e36..4a13ceaf4093 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -256,86 +256,77 @@ static inline const char *dwc3_ep_event_string(char *str, size_t size,
u8 epnum = event->endpoint_number;
size_t len;
int status;
- int ret;
- ret = snprintf(str, size, "ep%d%s: ", epnum >> 1,
+ len = scnprintf(str, size, "ep%d%s: ", epnum >> 1,
(epnum & 1) ? "in" : "out");
- if (ret < 0)
- return "UNKNOWN";
status = event->status;
switch (event->endpoint_event) {
case DWC3_DEPEVT_XFERCOMPLETE:
- len = strlen(str);
- snprintf(str + len, size - len, "Transfer Complete (%c%c%c)",
+ len += scnprintf(str + len, size - len,
+ "Transfer Complete (%c%c%c)",
status & DEPEVT_STATUS_SHORT ? 'S' : 's',
status & DEPEVT_STATUS_IOC ? 'I' : 'i',
status & DEPEVT_STATUS_LST ? 'L' : 'l');
- len = strlen(str);
-
if (epnum <= 1)
- snprintf(str + len, size - len, " [%s]",
+ scnprintf(str + len, size - len, " [%s]",
dwc3_ep0_state_string(ep0state));
break;
case DWC3_DEPEVT_XFERINPROGRESS:
- len = strlen(str);
-
- snprintf(str + len, size - len, "Transfer In Progress [%d] (%c%c%c)",
+ scnprintf(str + len, size - len,
+ "Transfer In Progress [%d] (%c%c%c)",
event->parameters,
status & DEPEVT_STATUS_SHORT ? 'S' : 's',
status & DEPEVT_STATUS_IOC ? 'I' : 'i',
status & DEPEVT_STATUS_LST ? 'M' : 'm');
break;
case DWC3_DEPEVT_XFERNOTREADY:
- len = strlen(str);
-
- snprintf(str + len, size - len, "Transfer Not Ready [%d]%s",
+ len += scnprintf(str + len, size - len,
+ "Transfer Not Ready [%d]%s",
event->parameters,
status & DEPEVT_STATUS_TRANSFER_ACTIVE ?
" (Active)" : " (Not Active)");
- len = strlen(str);
-
/* Control Endpoints */
if (epnum <= 1) {
int phase = DEPEVT_STATUS_CONTROL_PHASE(event->status);
switch (phase) {
case DEPEVT_STATUS_CONTROL_DATA:
- snprintf(str + ret, size - ret,
+ scnprintf(str + len, size - len,
" [Data Phase]");
break;
case DEPEVT_STATUS_CONTROL_STATUS:
- snprintf(str + ret, size - ret,
+ scnprintf(str + len, size - len,
" [Status Phase]");
}
}
break;
case DWC3_DEPEVT_RXTXFIFOEVT:
- snprintf(str + ret, size - ret, "FIFO");
+ scnprintf(str + len, size - len, "FIFO");
break;
case DWC3_DEPEVT_STREAMEVT:
status = event->status;
switch (status) {
case DEPEVT_STREAMEVT_FOUND:
- snprintf(str + ret, size - ret, " Stream %d Found",
+ scnprintf(str + len, size - len, " Stream %d Found",
event->parameters);
break;
case DEPEVT_STREAMEVT_NOTFOUND:
default:
- snprintf(str + ret, size - ret, " Stream Not Found");
+ scnprintf(str + len, size - len, " Stream Not Found");
break;
}
break;
case DWC3_DEPEVT_EPCMDCMPLT:
- snprintf(str + ret, size - ret, "Endpoint Command Complete");
+ scnprintf(str + len, size - len, "Endpoint Command Complete");
break;
default:
- snprintf(str, size, "UNKNOWN");
+ scnprintf(str + len, size - len, "UNKNOWN");
}
return str;
--
2.25.0
