Add usb-role-switch property for Tegra210 and Tegra186 platforms. This entry is used by XUSB pad controller driver to register for role changes for OTG/Peripheral capable USB 2 ports. Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx> Acked-by: Thierry Reding <treding@xxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- V5: - No changes. --- V3-V4: - Added Acked-by updates to commit message. --- V2: - Moved usb-role-switch to seperate Required section as suggested by Thierry. - Added reference to usb/usb-conn-gpio.txt for connector subnode. --- .../devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 9fb682e..23bf354 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -174,6 +174,12 @@ Required properties: - "device": for USB device mode - "otg": for USB OTG mode +Required properties for OTG/Peripheral capable USB2 ports: +- usb-role-switch: Boolean property to indicate that the port support OTG or + peripheral mode. If present, the port supports switching between USB host + and peripheral roles. Connector should be added as subnode. + See usb/usb-conn-gpio.txt. + Optional properties: - nvidia,internal: A boolean property whose presence determines that a port is internal. In the absence of this property the port is considered to be -- 2.7.4