Re: [PATCH v4 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/01/2020 03:30, Hanjie Lin wrote:
> This adds support for the USB2 PHY found in the Amlogic A1 SoC Family.
> 
> It supports host mode only.
> 
> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
> ---
>  drivers/phy/amlogic/phy-meson-g12a-usb2.c | 99 +++++++++++++++++++++----------
>  1 file changed, 69 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
> index 9065ffc..16a1c0e 100644
> --- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c
> +++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
> @@ -146,11 +146,17 @@
>  #define RESET_COMPLETE_TIME					1000
>  #define PLL_RESET_COMPLETE_TIME					100
>  
> +enum meson_soc_id {
> +	MESON_SOC_G12A  = 0,
> +	MESON_SOC_A1,
> +};
> +
>  struct phy_meson_g12a_usb2_priv {
>  	struct device		*dev;
>  	struct regmap		*regmap;
>  	struct clk		*clk;
>  	struct reset_control	*reset;
> +	int                     soc_id;
>  };
>  
>  static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
> @@ -164,6 +170,7 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
>  {
>  	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
>  	int ret;
> +	unsigned int value;
>  
>  	ret = reset_control_reset(priv->reset);
>  	if (ret)
> @@ -192,18 +199,22 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
>  		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
>  		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
>  
> -	regmap_write(priv->regmap, PHY_CTRL_R18,
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
> -		     FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
> -		     PHY_CTRL_R18_MPLL_ACG_RANGE);
> +	value = FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
> +		FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
> +		PHY_CTRL_R18_MPLL_ACG_RANGE;
> +
> +	if (priv->soc_id == MESON_SOC_A1)
> +		value |= PHY_CTRL_R18_MPLL_DCO_CLK_SEL;
> +
> +	regmap_write(priv->regmap, PHY_CTRL_R18, value);
>  
>  	udelay(PLL_RESET_COMPLETE_TIME);
>  
> @@ -227,13 +238,24 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
>  		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
>  		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
>  
> -	regmap_write(priv->regmap, PHY_CTRL_R4,
> -		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
> -		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
> -		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
> -		     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
> -		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
> -		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
> +	if (priv->soc_id == MESON_SOC_G12A)
> +		regmap_write(priv->regmap, PHY_CTRL_R4,
> +			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
> +			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
> +			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
> +			     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
> +			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
> +			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
> +	else if (priv->soc_id == MESON_SOC_A1) {
> +		regmap_write(priv->regmap, PHY_CTRL_R21,
> +			     PHY_CTRL_R21_USB2_CAL_ACK_EN |
> +			     PHY_CTRL_R21_USB2_TX_STRG_PD |
> +			     FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0, 2));
> +
> +		/* Analog Settings */
> +		regmap_write(priv->regmap, PHY_CTRL_R13,
> +			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
> +	}
>  
>  	/* Tuning Disconnect Threshold */
>  	regmap_write(priv->regmap, PHY_CTRL_R3,
> @@ -241,11 +263,13 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
>  		     FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
>  		     FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
>  
> -	/* Analog Settings */
> -	regmap_write(priv->regmap, PHY_CTRL_R14, 0);
> -	regmap_write(priv->regmap, PHY_CTRL_R13,
> -		     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
> -		     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
> +	if (priv->soc_id == MESON_SOC_G12A) {
> +		/* Analog Settings */
> +		regmap_write(priv->regmap, PHY_CTRL_R14, 0);
> +		regmap_write(priv->regmap, PHY_CTRL_R13,
> +			     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
> +			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
> +	}
>  
>  	return 0;
>  }
> @@ -286,16 +310,24 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
>  	if (IS_ERR(base))
>  		return PTR_ERR(base);
>  
> +	priv->soc_id = (enum meson_soc_id)of_device_get_match_data(&pdev->dev);
> +
>  	priv->regmap = devm_regmap_init_mmio(dev, base,
>  					     &phy_meson_g12a_usb2_regmap_conf);
>  	if (IS_ERR(priv->regmap))
>  		return PTR_ERR(priv->regmap);
>  
> -	priv->clk = devm_clk_get(dev, "xtal");
> -	if (IS_ERR(priv->clk))
> -		return PTR_ERR(priv->clk);
> +	if (priv->soc_id == MESON_SOC_G12A) {
> +		priv->clk = devm_clk_get(dev, "xtal");
> +		if (IS_ERR(priv->clk))
> +			return PTR_ERR(priv->clk);
> +	} else if (priv->soc_id == MESON_SOC_A1) {
> +		priv->clk = devm_clk_get(dev, "xtal_usb_phy");
> +		if (IS_ERR(priv->clk))
> +			return PTR_ERR(priv->clk);
> +	}
>  
> -	priv->reset = devm_reset_control_get(dev, "phy");
> +	priv->reset = devm_reset_control_get(dev, NULL);


PLease keep the reset-names in the bindings and leave this as-is.

>  	if (IS_ERR(priv->reset))
>  		return PTR_ERR(priv->reset);
>  
> @@ -321,8 +353,15 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
> -	{ .compatible = "amlogic,g12a-usb2-phy", },
> -	{ },
> +	{
> +		.compatible = "amlogic,g12a-usb2-phy",
> +		.data = (void *)MESON_SOC_G12A,
> +	},
> +	{
> +		.compatible = "amlogic,a1-usb2-phy",
> +		.data = (void *)MESON_SOC_A1,
> +	},
> +	{ /* Sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
>  
> 

With the devm_reset_control_get change reverted:
Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>

Neil



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux