Re: [PATCH v2 0/9] thunderbolt: Add support for USB4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 17, 2019 at 03:33:36PM +0300, Mika Westerberg wrote:
> Hi all,
> 
> USB4 is the public specification of Thunderbolt 3 protocol and can be
> downloaded here:
> 
>   https://www.usb.org/sites/default/files/USB4%20Specification_1.zip
> 
> USB4 is about tunneling different protocols over a single cable (in the
> same way as Thunderbolt). The current USB4 spec supports PCIe, Display Port
> and USB 3.x, and also software based protocols such as networking between
> domains (hosts).
> 
> So far PCs have been using firmware based Connection Manager (FW CM, ICM)
> and Apple systems have been using software based one (SW CM, ECM). A
> Connection Manager is the entity that handles creation of different tunnel
> types through the USB4 (and Thunderbolt) fabric. With USB4 the plan is to
> have software based Connection Manager everywhere but some early systems
> will come with firmware based connection manager.
> 
> Current Linux Thunderbolt driver supports both "modes" and can detect which
> one to use dynamically.
> 
> This series extends the Linux Thunderbolt driver to support USB4 compliant
> hosts and devices (this applies to both firmware and software based
> connection managers). USB4 Features enabled by this series include:
> 
>   - PCIe tunneling
>   - Display Port tunneling
>   - USB 3.x tunneling
>   - P2P networking (implemented in drivers/net/thunderbolt.c)
>   - Host and device NVM firmware upgrade
> 
> Power management support is still work in progress. It will be submitted
> later on once properly tested.
> 
> The previous versions of the series can be seen here:
> 
>   v1: https://lore.kernel.org/linux-usb/20191023112154.64235-1-mika.westerberg@xxxxxxxxxxxxxxx/
>   RFC: https://lore.kernel.org/lkml/20191001113830.13028-1-mika.westerberg@xxxxxxxxxxxxxxx/
> 
> Changes from v1:
> 
>   * Rebased on top of v5.5-rc2.
>   * Add a new patch to populate PG field in hotplug ack packet.
>   * Rename the networking driver Kconfig symbol to CONFIG_USB4_NET to
>     follow the driver itself (CONFIG_USB4).

At a quick glance, this looks nice and sane, good job.  I've taken all
of these into my tree, let's see if 0-day has any problems with it :)

thanks,

greg k-h



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux