On Tue, 2019-10-29 at 11:31 -0400, Peter Geis wrote:
> On Mon, Oct 28, 2019 at 9:59 PM Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> wrote:
> >
> > On Mon, 2019-10-28 at 18:22 +0000, Peter Geis wrote:
> > > Now that we have a proper phy driver, we can add the requisite bits to the
> > > rk3328 device tree.
> > > Added the u3drd and u3phy nodes.
> > >
> > > Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/rockchip/rk3328.dtsi | 72 ++++++++++++++++++++++++
> > > 1 file changed, 72 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> > > index 31cc1541f1f5..072e988ad655 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> > > @@ -805,6 +805,47 @@
> > > };
> > > };
> > >
> > > + usb3phy_grf: syscon@ff460000 {
> > > + compatible = "rockchip,usb3phy-grf", "syscon";
> > > + reg = <0x0 0xff460000 0x0 0x1000>;
> > > + };
> > > +
> > > + u3phy: usb3-phy@ff470000 {
> > usb-phy?
>
> This change does not seem wise, as there are also various usb2-phys
> that are controlled via other drivers, while the usb3phy also has to
> support usb2 as a fallback.
We can use u3phy label, or phy-cells = <1>, to provide phys type to
distighuish u3/u2phy if need.
>
> > > + compatible = "rockchip,rk3328-u3phy";
> > > + reg = <0x0 0xff470000 0x0 0x0>;
> > It's zero length, may be not necessary, how about use ranges with
> > parameter ?
>
> I'll look into this.
>
> >
> > > + rockchip,u3phygrf = <&usb3phy_grf>;
> > > + rockchip,grf = <&grf>;
> > > + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> > > + interrupt-names = "linestate";
> > > + clocks = <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>;
> > > + clock-names = "u3phy-otg", "u3phy-pipe";
> > To me, no need u3phy prefix
>
> Same as above, since this could cause confusion with the usb2 phy devices.
Other info can be used, e.g. compatible;
>
> > > + resets = <&cru SRST_USB3PHY_U2>,
> > > + <&cru SRST_USB3PHY_U3>,
> > > + <&cru SRST_USB3PHY_PIPE>,
> > > + <&cru SRST_USB3OTG_UTMI>,
> > > + <&cru SRST_USB3PHY_OTG_P>,
> > > + <&cru SRST_USB3PHY_PIPE_P>;
> > > + reset-names = "u3phy-u2-por", "u3phy-u3-por",
> > > + "u3phy-pipe-mac", "u3phy-utmi-mac",
> > > + "u3phy-utmi-apb", "u3phy-pipe-apb";
> > ditto
> >
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > + ranges;
> > > + status = "disabled";
> > > +
> > > + u3phy_utmi: utmi@ff470000 {
> > usb-phy instead of utmi?
>
> The stock driver looks for these by name, and they are both different functions.
> This change would break the driver.
Use phy_type? refer to bindings/usb/generic.txt
>
> >
> > > + reg = <0x0 0xff470000 0x0 0x8000>;
> > > + #phy-cells = <0>;
> > > + status = "disabled";
> > > + };
> > > +
> > > + u3phy_pipe: pipe@ff478000 {
> > usb-phy
>
> Same as above.
>
> > > + reg = <0x0 0xff478000 0x0 0x8000>;
> > > + #phy-cells = <0>;
> > > + status = "disabled";
> > > + };
> > > + };
> > > +
> > > sdmmc: dwmmc@ff500000 {
> > > compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
> > > reg = <0x0 0xff500000 0x0 0x4000>;
> > > @@ -936,6 +977,37 @@
> > > status = "disabled";
> > > };
> > >
> > > + usbdrd3: usb@ff600000 {
> > > + compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
> > > + clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
> > > + <&cru SCLK_USB3OTG_SUSPEND>;
> > > + clock-names = "ref", "bus_early",
> > > + "suspend";
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > + ranges;
> > > + clock-ranges;
> > > + status = "disabled";
> > > +
> > > + usbdrd_dwc3: dwc3@ff600000 {
> > > + compatible = "snps,dwc3";
> > > + reg = <0x0 0xff600000 0x0 0x100000>;
> > > + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> > > + dr_mode = "otg";
> > > + phys = <&u3phy_utmi>, <&u3phy_pipe>;
> > > + phy-names = "usb2-phy", "usb3-phy";
> > > + phy_type = "utmi_wide";
> > > + snps,dis_enblslpm_quirk;
> > > + snps,dis-u2-freeclk-exists-quirk;
> > > + snps,dis_u2_susphy_quirk;
> > > + snps,dis_u3_susphy_quirk;
> > > + snps,dis-del-phy-power-chg-quirk;
> > > + snps,dis-tx-ipgap-linecheck-quirk;
> > > + snps,xhci-trb-ent-quirk;
> > > + status = "disabled";
> > > + };
> > > + };
> > > +
> > > gic: interrupt-controller@ff811000 {
> > > compatible = "arm,gic-400";
> > > #interrupt-cells = <3>;
> >
> >
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
