On Mon, 2019-10-28 at 18:22 +0000, Peter Geis wrote:
> Now that we have a proper phy driver, we can add the requisite bits to the
> rk3328 device tree.
> Added the u3drd and u3phy nodes.
>
> Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 72 ++++++++++++++++++++++++
> 1 file changed, 72 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index 31cc1541f1f5..072e988ad655 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -805,6 +805,47 @@
> };
> };
>
> + usb3phy_grf: syscon@ff460000 {
> + compatible = "rockchip,usb3phy-grf", "syscon";
> + reg = <0x0 0xff460000 0x0 0x1000>;
> + };
> +
> + u3phy: usb3-phy@ff470000 {
usb-phy?
> + compatible = "rockchip,rk3328-u3phy";
> + reg = <0x0 0xff470000 0x0 0x0>;
It's zero length, may be not necessary, how about use ranges with
parameter ?
> + rockchip,u3phygrf = <&usb3phy_grf>;
> + rockchip,grf = <&grf>;
> + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "linestate";
> + clocks = <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>;
> + clock-names = "u3phy-otg", "u3phy-pipe";
To me, no need u3phy prefix
> + resets = <&cru SRST_USB3PHY_U2>,
> + <&cru SRST_USB3PHY_U3>,
> + <&cru SRST_USB3PHY_PIPE>,
> + <&cru SRST_USB3OTG_UTMI>,
> + <&cru SRST_USB3PHY_OTG_P>,
> + <&cru SRST_USB3PHY_PIPE_P>;
> + reset-names = "u3phy-u2-por", "u3phy-u3-por",
> + "u3phy-pipe-mac", "u3phy-utmi-mac",
> + "u3phy-utmi-apb", "u3phy-pipe-apb";
ditto
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + u3phy_utmi: utmi@ff470000 {
usb-phy instead of utmi?
> + reg = <0x0 0xff470000 0x0 0x8000>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> + u3phy_pipe: pipe@ff478000 {
usb-phy
> + reg = <0x0 0xff478000 0x0 0x8000>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> sdmmc: dwmmc@ff500000 {
> compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xff500000 0x0 0x4000>;
> @@ -936,6 +977,37 @@
> status = "disabled";
> };
>
> + usbdrd3: usb@ff600000 {
> + compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
> + clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
> + <&cru SCLK_USB3OTG_SUSPEND>;
> + clock-names = "ref", "bus_early",
> + "suspend";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-ranges;
> + status = "disabled";
> +
> + usbdrd_dwc3: dwc3@ff600000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0xff600000 0x0 0x100000>;
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "otg";
> + phys = <&u3phy_utmi>, <&u3phy_pipe>;
> + phy-names = "usb2-phy", "usb3-phy";
> + phy_type = "utmi_wide";
> + snps,dis_enblslpm_quirk;
> + snps,dis-u2-freeclk-exists-quirk;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_u3_susphy_quirk;
> + snps,dis-del-phy-power-chg-quirk;
> + snps,dis-tx-ipgap-linecheck-quirk;
> + snps,xhci-trb-ent-quirk;
> + status = "disabled";
> + };
> + };
> +
> gic: interrupt-controller@ff811000 {
> compatible = "arm,gic-400";
> #interrupt-cells = <3>;
