Re: [PATCH] PCI: increase D3 delay for AMD Ryzen5/7 XHCI controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 22, 2019 at 10:40:00AM +0800, Daniel Drake wrote:
> On Mon, Oct 21, 2019 at 7:33 PM Mika Westerberg
> <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> > Just to be sure, did you try the patch or just looked at it? Because
> > what the patch does is that it does the delay when the downstream/root
> > port is resumed, not the xHCI itself.
> 
> I tried it, it didn't fix the problem.

:(

It may very well be that this particular xHCI controller needs more than
that 10ms from D3hot -> D0 transition. Again the PCIe spec says the 10ms
is the minimum time system software needs to delay but it does not say
what would be the maximum time the function absolutely must be properly
in D0.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux