Re: [PATCH v2 0/7] add Tegra194 XUSB host and pad controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 04, 2019 at 04:19:34PM +0800, JC Kuo wrote:
> Hi,
> 
> This series introduces support for Tegra194 XUSB host and pad
> controller. Tegra194 XUSB host and pad controller are highly
> similar to the controllers found on Tegra186. Therefore, it's
> possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194.
> 
> JC Kuo (7):
>   xhci: tegra: Parameterize mailbox register addresses
>   usb: host: xhci-tegra: Add Tegra194 XHCI support
>   phy: tegra: xusb: Protect Tegra186 soc with config
>   phy: tegra: xusb: Add Tegra194 support
>   dt-bindings: phy: tegra: Add Tegra194 support
>   arm64: tegra: Add XUSB and pad controller on Tegra194
>   arm64: tegra: Enable XUSB host in P2972-0000 board

What changed from v1?  You need to put that somewhere, usually in the
patches themselves, below the --- line.

Or at the very least, in the cover letter.

Given that I can't find it anywhere here, I'll expect a v3 with that
information to be sent soon :(

thanks,

greg k-h



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux