Hi, This series introduces support for Tegra194 XUSB host and pad controller. Tegra194 XUSB host and pad controller are highly similar to the controllers found on Tegra186. Therefore, it's possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. JC Kuo (7): xhci: tegra: Parameterize mailbox register addresses usb: host: xhci-tegra: Add Tegra194 XHCI support phy: tegra: xusb: Protect Tegra186 soc with config phy: tegra: xusb: Add Tegra194 support dt-bindings: phy: tegra: Add Tegra194 support arm64: tegra: Add XUSB and pad controller on Tegra194 arm64: tegra: Enable XUSB host in P2972-0000 board .../phy/nvidia,tegra124-xusb-padctl.txt | 16 ++ .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++- .../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 ++++++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 139 +++++++++++++++++ drivers/phy/tegra/Makefile | 1 + drivers/phy/tegra/xusb-tegra186.c | 144 +++++++++++++----- drivers/phy/tegra/xusb.c | 7 + drivers/phy/tegra/xusb.h | 6 + drivers/usb/host/xhci-tegra.c | 88 +++++++++-- 9 files changed, 448 insertions(+), 51 deletions(-) -- 2.17.1
