From: Chandana Kishori Chiluveru <cchiluve@xxxxxxxxxxxxxx>
Populate USB DT nodes with interconnect properties.
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@xxxxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index fcb9330..e4885f3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1837,6 +1837,12 @@
resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&rsc_hlos MASTER_USB3_0
+ &rsc_hlos SLAVE_EBI1>,
+ <&rsc_hlos MASTER_APPSS_PROC
+ &rsc_hlos SLAVE_USB3_0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
@@ -1881,6 +1887,12 @@
resets = <&gcc GCC_USB30_SEC_BCR>;
+ interconnects = <&rsc_hlos MASTER_USB3_1
+ &rsc_hlos SLAVE_EBI1>,
+ <&rsc_hlos MASTER_APPSS_PROC
+ &rsc_hlos SLAVE_USB3_1>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_2_dwc3: dwc3@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
