Hi Lars,
> Please do a full test of the interface attributes (Class/SubClass/Proto)
> whenever possible, this could be helpful in case the mfgr makes a device
> with different interface layout but re-uses an already used vid:pid.
>
What should we do specifically for "a full test of the interface attributes"?
> Both interfaces has attributes ff/00/00 so there is no reason for doing a less accurate test.
>
Forgive me if I’m wrong, did you say mean that we should use USB_DEVICE_AND_INTERFACE_INFO" instead of "USB_DEVICE_INTERFACE_CLASS" ?
Regards,
Yoshiaki Okamoto
________________________________________
差出人: Lars Melin <larsm17@xxxxxxxxx>
送信日時: 2019年7月17日 21:05
宛先: OKAMOTO Yoshiaki; johan@xxxxxxxxxx
CC: YAMAMOTO Hiroyuki; linux-usb@xxxxxxxxxxxxxxx
件名: Re: [PATCH v2] USB: serial: option: Add support for ZTE MF871A
On 7/17/2019 12:40, Yoshiaki Okamoto wrote:
> This patch adds support for MF871A USB modem (aka Speed USB STICK U03)
> to option driver. This modem is manufactured by ZTE corporation, and
> sold by KDDI.
>
> Interface layout:
> 0: AT
> 1: MODEM
>
> usb-devices output:
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=19d2 ProdID=1481 Rev=52.87
> S: Manufacturer=ZTE,Incorporated
> S: Product=ZTE Technologies MSM
> S: SerialNumber=1234567890ABCDEF
> C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>
> Co-developed-by: Hiroyuki Yamamoto <hyamamo@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Hiroyuki Yamamoto <hyamamo@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Yoshiaki Okamoto <yokamoto@xxxxxxxxxxxxxxxxxxxx>
> ---
>
> Changes in v2:
> - Add Co-developed-by tag.
> - Move away product-id define and add short comment after the entry.
>
> drivers/usb/serial/option.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index a0aaf0635359..3188b3cb0f21 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -1548,6 +1548,7 @@ static const struct usb_device_id option_ids[] = {
> { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */
> .driver_info = RSVD(2) },
> { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) }, /* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
> + { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1481, 0xff) }, /* ZTE MF871A */
> { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
> { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
> { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
>
Please do a full test of the interface attributes (Class/SubClass/Proto)
whenever possible, this could be helpful in case the mfgr makes a device
with different interface layout but re-uses an already used vid:pid.
Both interfaces has attributes ff/00/00 so there is no reason for doing
a less accurate test.
rgds
/Lars
