On 7/17/2019 12:40, Yoshiaki Okamoto wrote:
This patch adds support for MF871A USB modem (aka Speed USB STICK U03)
to option driver. This modem is manufactured by ZTE corporation, and
sold by KDDI.
Interface layout:
0: AT
1: MODEM
usb-devices output:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1481 Rev=52.87
S: Manufacturer=ZTE,Incorporated
S: Product=ZTE Technologies MSM
S: SerialNumber=1234567890ABCDEF
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
Co-developed-by: Hiroyuki Yamamoto <hyamamo@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Hiroyuki Yamamoto <hyamamo@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Yoshiaki Okamoto <yokamoto@xxxxxxxxxxxxxxxxxxxx>
---
Changes in v2:
- Add Co-developed-by tag.
- Move away product-id define and add short comment after the entry.
drivers/usb/serial/option.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a0aaf0635359..3188b3cb0f21 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1548,6 +1548,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */
.driver_info = RSVD(2) },
{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) }, /* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
+ { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1481, 0xff) }, /* ZTE MF871A */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
Please do a full test of the interface attributes (Class/SubClass/Proto)
whenever possible, this could be helpful in case the mfgr makes a device
with different interface layout but re-uses an already used vid:pid.
Both interfaces has attributes ff/00/00 so there is no reason for doing
a less accurate test.
rgds
/Lars
