On Wed, 2019-06-05 at 17:02 -0400, Alan Stern wrote: > On Wed, 5 Jun 2019, Greg KH wrote: > > > > > On Fri, May 10, 2019 at 11:01:09AM +0100, Mayuresh Kulkarni wrote: > > > > > > - The current driver increments the PM ref-count in its .open > > > API and decrements it in its .close API. > > > - Due to this, it is not possible for the usb_device to go into > > > suspend (L2) even if all of its interfaces report idle to usb-core. > > > - In order to allow the suspend, 2 new ioctls are added: > > > 1. USBDEVFS_SUSPEND: calls auto-suspend and indicates to usb/pm core > > > to attempt suspend, if appropriate. This is a non-blocking call. > > > 2. USBDEVFS_WAIT_RESUME: waits for resume. This is a blocking call. > > > The resume could happen due to: > > > host-wake (i.e.: any driver bound to interface(s) of device wants to > > > send/receive control/data) > > > OR > > > remote-wake (i.e.: when remote-wake enabled device generates a > > > remote-wake to host). > > > In both these conditions, this call will return. > > > - It is expected that: > > > 1. When user-space thinks the device is idle from its point-of-view, > > > it calls USBDEVFS_SUSPEND. > > > 2. After USBDEVFS_WAIT_RESUME call returns, > > > the callers queries the device/interface of its interest to see > > > what caused resume and take appropriate action on it. > > I'm going to make a bunch of random comments on this patch, some > > cosmetic... > > > > First off, the above is horrible to try to read, please format things in > > a sane way such that we can understand it well. > > > > > > > > The link to relevant discussion about this patch on linux-usb is - > > > https://www.spinics.net/lists/linux-usb/msg173285.html > > You should not need to reference any external web site for a changelog > > entry, just put the needed information in the changelog itself. > > > > > > > > Signed-off-by: Mayuresh Kulkarni <mkulkarni@xxxxxxxxxxxxxxxxxxxxx> > Mayuresh: > > I'm sorry; I completely lost sight of this patch (distracted by too > many other things). > Hi Alan, Thanks for your review and apologies for late response from me. I was on PTO last week and then in a training this week. > Aside from the issues Greg raised, it isn't right because it relies on > the suspend and resume callbacks for individual interfaces, not for the > whole device. There are a few other things that should be changed as > well. In our use-case, we open the USB device with our VID/PID and then using that fd we bind to our interface. So this approach probably worked for our use-case. > Below is my attempt at doing the same thing (not tested, and it doesn't > answer all of Greg's objections). It is very similar to your patch. > Does it work for your application? > I am checking your code-changes and will get back to you on this by next week. > (Note: I imagine you might run into trouble because devices generally > do not get put into runtime suspend immediately. So if you call the > USBDEVFS_SUSPEND ioctl and then the USBDEVFS_WAIT_FOR_RESUME ioctl, the > wait will return immediately because the device hasn't yet been > suspended.) > For this point, I am suggesting below - How about we return "udev->dev.power.usage_count" from suspend ioctl? count = 0 -> suspend success so good to call wait-for-resume ioctl count != 0 -> don't call resume since suspend did not happen. Will that work? > Alan Stern > > > drivers/usb/core/devio.c | 66 +++++++++++++++++++++++++++++++++++- > -- > drivers/usb/core/generic.c | 5 ++ > drivers/usb/core/usb.h | 3 + > include/uapi/linux/usbdevice_fs.h | 2 + > 4 files changed, 72 insertions(+), 4 deletions(-) > > Index: usb-devel/drivers/usb/core/devio.c > =================================================================== > --- usb-devel.orig/drivers/usb/core/devio.c > +++ usb-devel/drivers/usb/core/devio.c > @@ -60,14 +60,17 @@ struct usb_dev_state { > struct list_head async_completed; > struct list_head memory_list; > wait_queue_head_t wait; /* wake up if a request completed */ > + wait_queue_head_t wait_for_resume; /* wake up upon runtime resume > */ > unsigned int discsignr; > struct pid *disc_pid; > const struct cred *cred; > void __user *disccontext; > unsigned long ifclaimed; > u32 disabled_bulk_eps; > - bool privileges_dropped; > unsigned long interface_allowed_mask; > + bool privileges_dropped; > + bool is_suspended; > + bool suspend_requested; > }; > > struct usb_memory { > @@ -699,9 +702,7 @@ static void driver_disconnect(struct usb > destroy_async_on_interface(ps, ifnum); > } > > -/* The following routines are merely placeholders. There is no way > - * to inform a user task about suspend or resumes. > - */ > +/* We don't care about suspend/resume of claimed interfaces */ > static int driver_suspend(struct usb_interface *intf, pm_message_t msg) > { > return 0; > @@ -712,12 +713,32 @@ static int driver_resume(struct usb_inte > return 0; > } > > +/* The following routines apply to the entire device, not interfaces */ > +void usbfs_notify_suspend(struct usb_device *udev) > +{ > + struct usb_dev_state *ps; > + > + list_for_each_entry(ps, &udev->filelist, list) > + ps->is_suspended = true; > +} > + > +void usbfs_notify_resume(struct usb_device *udev) > +{ > + struct usb_dev_state *ps; > + > + list_for_each_entry(ps, &udev->filelist, list) { > + ps->is_suspended = false; > + wake_up_all(&ps->wait_for_resume); > + } > +} > + > struct usb_driver usbfs_driver = { > .name = "usbfs", > .probe = driver_probe, > .disconnect = driver_disconnect, > .suspend = driver_suspend, > .resume = driver_resume, > + .supports_autosuspend = 1, > }; > > static int claimintf(struct usb_dev_state *ps, unsigned int ifnum) > @@ -1008,6 +1029,7 @@ static int usbdev_open(struct inode *ino > INIT_LIST_HEAD(&ps->async_completed); > INIT_LIST_HEAD(&ps->memory_list); > init_waitqueue_head(&ps->wait); > + init_waitqueue_head(&ps->wait_for_resume); > ps->disc_pid = get_pid(task_pid(current)); > ps->cred = get_current_cred(); > smp_wmb(); > @@ -1034,6 +1056,8 @@ static int usbdev_release(struct inode * > struct async *as; > > usb_lock_device(dev); > + if (ps->suspend_requested) > + usb_autoresume_device(dev); > usb_hub_release_all_ports(dev, ps); > > list_del_init(&ps->list); > @@ -2355,6 +2379,17 @@ static int proc_drop_privileges(struct u > return 0; > } > > +static int proc_wait_for_resume(struct usb_dev_state *ps) > +{ > + int ret; > + > + usb_unlock_device(ps->dev); > + ret = wait_event_interruptible(ps->wait_for_resume, !ps- > >is_suspended); > + usb_lock_device(ps->dev); > + > + return ret; > +} > + > /* > * NOTE: All requests here that have interface numbers as parameters > * are assuming that somehow the configuration has been prevented from > @@ -2373,6 +2408,17 @@ static long usbdev_do_ioctl(struct file > > usb_lock_device(dev); > > + /* Almost all operations require the device to be runtime-active */ > + if (cmd != USBDEVFS_SUSPEND && cmd != USBDEVFS_WAIT_FOR_RESUME && > + ps->suspend_requested) { > + if (usb_autoresume_device(dev) == 0) { > + ps->suspend_requested = false; > + } else { > + ret = -EIO; > + goto done; > + } > + } > + > /* Reap operations are allowed even after disconnection */ > switch (cmd) { > case USBDEVFS_REAPURB: > @@ -2549,6 +2595,16 @@ static long usbdev_do_ioctl(struct file > case USBDEVFS_GET_SPEED: > ret = ps->dev->speed; > break; > + case USBDEVFS_SUSPEND: > + if (!ps->suspend_requested) { > + usb_autosuspend_device(dev); > + ps->suspend_requested = true; > + } > + ret = 0; > + break; > + case USBDEVFS_WAIT_FOR_RESUME: > + ret = proc_wait_for_resume(ps); > + break; > } > > done: > @@ -2620,6 +2676,8 @@ static void usbdev_remove(struct usb_dev > ps = list_entry(udev->filelist.next, struct usb_dev_state, > list); > destroy_all_async(ps); > wake_up_all(&ps->wait); > + ps->is_suspended = false; > + wake_up_all(&ps->wait_for_resume); > list_del_init(&ps->list); > if (ps->discsignr) { > clear_siginfo(&sinfo); > Index: usb-devel/drivers/usb/core/generic.c > =================================================================== > --- usb-devel.orig/drivers/usb/core/generic.c > +++ usb-devel/drivers/usb/core/generic.c > @@ -257,6 +257,8 @@ static int generic_suspend(struct usb_de > else > rc = usb_port_suspend(udev, msg); > > + if (rc == 0) > + usbfs_notify_suspend(udev); > return rc; > } > > @@ -273,6 +275,9 @@ static int generic_resume(struct usb_dev > rc = hcd_bus_resume(udev, msg); > else > rc = usb_port_resume(udev, msg); > + > + if (rc == 0) > + usbfs_notify_resume(udev); > return rc; > } > > Index: usb-devel/drivers/usb/core/usb.h > =================================================================== > --- usb-devel.orig/drivers/usb/core/usb.h > +++ usb-devel/drivers/usb/core/usb.h > @@ -95,6 +95,9 @@ extern int usb_runtime_idle(struct devic > extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev); > extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev); > > +extern void usbfs_notify_suspend(struct usb_device *udev); > +extern void usbfs_notify_resume(struct usb_device *udev); > + > #else > > static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg) > Index: usb-devel/include/uapi/linux/usbdevice_fs.h > =================================================================== > --- usb-devel.orig/include/uapi/linux/usbdevice_fs.h > +++ usb-devel/include/uapi/linux/usbdevice_fs.h > @@ -197,5 +197,7 @@ struct usbdevfs_streams { > #define USBDEVFS_FREE_STREAMS _IOR('U', 29, struct usbdevfs_streams) > #define USBDEVFS_DROP_PRIVILEGES _IOW('U', 30, __u32) > #define USBDEVFS_GET_SPEED _IO('U', 31) > +#define USBDEVFS_SUSPEND _IO('U', 32) > +#define USBDEVFS_WAIT_FOR_RESUME _IO('U', 33) > > #endif /* _UAPI_LINUX_USBDEVICE_FS_H */ >
