Re: [RFC][PATCH 00/10] Mount, FS, Block and Keyrings notifications [ver #3]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 6, 2019 at 9:43 AM Casey Schaufler <casey@xxxxxxxxxxxxxxxx> wrote:
>
> On 6/6/2019 7:05 AM, Stephen Smalley wrote:
> > On 6/6/19 9:16 AM, David Howells wrote:
> >> Stephen Smalley <sds@xxxxxxxxxxxxx> wrote:
> >>
> >> This might be easier to discuss if you can reply to:
> >>
> >>     https://lore.kernel.org/lkml/5393.1559768763@xxxxxxxxxxxxxxxxxxxxxx/
> >>
> >> which is on the ver #2 posting of this patchset.
> >
> > Sorry for being late to the party.  Not sure whether you're asking me to respond only there or both there and here to your comments below.  I'll start here but can revisit if it's a problem.
> >>
> >>>> LSM support is included, but controversial:
> >>>>
> >>>>    (1) The creds of the process that did the fput() that reduced the refcount
> >>>>        to zero are cached in the file struct.
> >>>>
> >>>>    (2) __fput() overrides the current creds with the creds from (1) whilst
> >>>>        doing the cleanup, thereby making sure that the creds seen by the
> >>>>        destruction notification generated by mntput() appears to come from
> >>>>        the last fputter.
> >>>>
> >>>>    (3) security_post_notification() is called for each queue that we might
> >>>>        want to post a notification into, thereby allowing the LSM to prevent
> >>>>        covert communications.
> >>>>
> >>>>    (?) Do I need to add security_set_watch(), say, to rule on whether a watch
> >>>>        may be set in the first place?  I might need to add a variant per
> >>>>        watch-type.
> >>>>
> >>>>    (?) Do I really need to keep track of the process creds in which an
> >>>>        implicit object destruction happened?  For example, imagine you create
> >>>>        an fd with fsopen()/fsmount().  It is marked to dissolve the mount it
> >>>>        refers to on close unless move_mount() clears that flag.  Now, imagine
> >>>>        someone looking at that fd through procfs at the same time as you exit
> >>>>        due to an error.  The LSM sees the destruction notification come from
> >>>>        the looker if they happen to do their fput() after yours.
> >>>
> >>>
> >>> I'm not in favor of this approach.
> >>
> >> Which bit?  The last point?  Keeping track of the process creds after an
> >> implicit object destruction.
> >
> > (1), (2), (3), and the last point.
> >
> >>> Can we check permission to the object being watched when a watch is set
> >>> (read-like access),
> >>
> >> Yes, and I need to do that.  I think it's likely to require an extra hook for
> >> each entry point added because the objects are different:
> >>
> >>     int security_watch_key(struct watch *watch, struct key *key);
> >>     int security_watch_sb(struct watch *watch, struct path *path);
> >>     int security_watch_mount(struct watch *watch, struct path *path);
> >>     int security_watch_devices(struct watch *watch);
> >>
> >>> make sure every access that can trigger a notification requires a
> >>> (write-like) permission to the accessed object,
> >>
> >> "write-like permssion" for whom?  The triggerer or the watcher?
> >
> > The former, i.e. the process that performed the operation that triggered the notification.  Think of it as a write from the process to the accessed object, which triggers a notification (another write) on some related object (the watched object), which is then read by the watcher.
>
> We agree that the process that performed the operation that triggered
> the notification is the initial subject. Smack will treat the process
> with the watch set (in particular, its ring buffer) as the object
> being written to. SELinux, with its finer grained controls, will
> involve other things as noted above. There are other place where we
> see this, notably IP packet delivery.
>
> The implication is that the information about the triggering
> process needs to be available throughout.
>
> >
> >> There are various 'classes' of events:
> >>
> >>   (1) System events (eg. hardware I/O errors, automount points expiring).
> >>
> >>   (2) Direct events (eg. automounts, manual mounts, EDQUOT, key linkage).
> >>
> >>   (3) Indirect events (eg. exit/close doing the last fput and causing an
> >>       unmount).
> >>
> >> Class (1) are uncaused by a process, so I use init_cred for them.  One could
> >> argue that the automount point expiry should perhaps take place under the
> >> creds of whoever triggered it in the first place, but we need to be careful
> >> about long-term cred pinning.
> >
> > This seems equivalent to just checking whether the watcher is allowed to get that kind of event, no other cred truly needed.
> >
> >> Class (2) the causing process must've had permission to cause them - otherwise
> >> we wouldn't have got the event.
> >
> > So we've already done a check on the causing process, and we're going to check whether the watcher can set the watch. We just need to establish the connection between the accessed object and the watched object in some manner.
>
> I don't agree. That is, I don't believe it is sufficient.
> There is no guarantee that being able to set a watch on an
> object implies that every process that can trigger the event
> can send it to you.
>
>         Watcher has Smack label W
>         Triggerer has Smack label T
>         Watched object has Smack label O
>
>         Relevant Smack rules are
>
>         W O rw
>         T O rw
>
> The watcher will be able to set the watch,
> the triggerer will be able to trigger the event,
> but there is nothing that would allow the watcher
> to receive the event. This is not a case of watcher
> reading the watched object, as the event is delivered
> without any action by watcher.

I think this is an example of a bogus policy that should not be
supported by the kernel.




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux