On 14.3.2019 20.39, Georg Chini wrote:
On 14.03.19 15:00, Mathias Nyman wrote:
On 14.3.2019 14.38, Georg Chini wrote:
Hello,
I have a problem with multiple USB2 devices. After purchasing a new motherboard,
some USB2 devices (specifically audio devices and bluetooth dongles) do no longer
work when connected to a hub, even if they are the only device on the hub. They do
work when they are directly connected to an USB (2.0 or 3.0) port of the machine.
The error I am getting with the hub in between is "Not enough bandwidth for new
device state". Here are example kernel messages for a bluetooth dongle:
Mar 14 08:12:33 mini kernel: usb 1-4.1: new full-speed USB device number 15 using xhci_hcd
Mar 14 08:12:33 mini kernel: usb 1-4.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=31.64
Mar 14 08:12:33 mini kernel: usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 14 08:12:33 mini kernel: usb 1-4.1: Not enough bandwidth for new device state.
I have only one single USB controller:
00:15.0 USB controller: Intel Corporation Atom Processor C3000 Series USB 3.0 xHCI Controller (rev 11)
I am using kernel 5.0.
lsusb output:
Bus 002 Device 004: ID 05e3:0617 Genesys Logic, Inc.
Bus 002 Device 003: ID 05e3:0617 Genesys Logic, Inc.
Bus 002 Device 002: ID 05e3:0617 Genesys Logic, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 013: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 011: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 012: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 010: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 008: ID 046d:0994 Logitech, Inc. QuickCam Orbit/Sphere AF
Bus 001 Device 016: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 005: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 007: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 009: ID 0557:2419 ATEN International Co., Ltd
Bus 001 Device 006: ID 0557:7000 ATEN International Co., Ltd Hub
Bus 001 Device 004: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 003: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device
Bus 001 Device 002: ID 0b0e:0348 GN Netcom
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The C-Media sound device is directly connected to the machine and is working.
The BT dongle is on a hub and does not work. If I connect the C-Media device
to a hub, it will also produce the "not enough bandwidth" error. Can anybody help
me to debug this problem further?
Logs and traces could help, also lsusb -v output.
logs:
mount -t debugfs none /sys/kernel/debug
echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control
echo -n 'module usbcore =p' >/sys/kernel/debug/dynamic_debug/control
<connect failing usb devices>
send output of dmesg
traces:
mount -t debugfs none /sys/kernel/debug
echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
<connect failing device>
send content of /sys/kernel/debug/tracing/trace
-Mathias
Thanks for your reply. Please find the output attached. What I did:
- I removed all USB devices from the machine, except one USB hub
- I plugged the C-Media sound device into the hub and collected the data
- For reference I plugged the same device into a free USB 2.0 port on the
machine and collected the data.
As already said, direct connection to a port works while it does not work
on the hub. The files with _working are from plugging into the machine,
those with _failed are from plugging into the hub.
I also confirmed that the device is working when plugged directly into
the USB 3.0 port and also that it does not work on an USB 2.0 hub plugged
into an USB 2.0 port.
Hi,
According to lsusb your Genesys hub(s?) is(are) mess. Can you try with a different hub?
As an example it shows you have three USB3 hubs connected, first has 0 ports, and the other
two have 42 ports each. (not possible, or allowed)
The bandwidth error originates from xhci host. It's a 'Secondary Bandwidth Error' message
generated when xHCI calculates that the external hub can't handle the requested bandwidth
needed when enabling new endpoints on the connected device behind the hub.
-Mathias
