On Sun, Feb 03, 2019 at 12:59:07AM +0100, Linus Walleij wrote:
> This adds device tree bindings for the PXA25x USB Device
> Controller as found in the PXA25x and the IXP4xx.
>
> Cc: Robert Jarzmik <robert.jarzmik@xxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> .../devicetree/bindings/usb/pxa25x-udc.txt | 27 +++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/pxa25x-udc.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/pxa25x-udc.txt b/Documentation/devicetree/bindings/usb/pxa25x-udc.txt
> new file mode 100644
> index 000000000000..bbdbe0df3565
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/pxa25x-udc.txt
> @@ -0,0 +1,27 @@
> +PXA25x UDC (USB Device Controller)
> +
> +The PXA25x and IXP4xx USB Device Controller is different from the
> +PXA27x UDC described in pxa-usb.txt and is compatible between the
> +Marvell PXA25x and the Intel IXP4xx devices.
> +
> +Required properties:
> + - compatible: Should be one of
> + "marvell,pxa25x-udc"
Look at the 'has_cfr' flag in the driver. You should have 250 and 255
compatible strings to distinguish. That would get rid of the assembly
instruction helping towards building on !ARM.
> + "intel,ixp4xx-udc"
> + for USB controllers used in device mode.
> + - reg: usb device MMIO address space
> + - interrupts: single interrupt generated by the UDC IP
> + - clocks: input clock of the UDC IP (see clock-bindings.txt)
> +
> +Optional properties:
> + - gpios:
> + - gpio activated to control the USB D+ pullup (see gpio.txt)
This really should be part of a connector. Also, the Lubbock board is
different.
> +
> +Example:
> +
> +usb@c800b000 {
> + compatible = "intel,ixp4xx-udc";
> + reg = <0xc800b000 0x1000>;
> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pclk 0>;
> +};
> --
> 2.20.1
>
