Sebastian Andrzej Siewior пишет: > Ivan Kuten wrote: >> Hello, > Hello, > >> Then plug for example USB-to-Ethernet Adapter: >> >> usb 1-1.2: new high speed USB device using isp1760-hcd and address 3 >> usb 1-1.2: configuration #1 chosen from 1 choice >> eth0: register 'asix' at usb-isp1760-hcd-1.2, DLink DUB-E100 USB Ethernet, 00:80:c8:37:9d:6c >> usb 1-1.2: New USB device found, idVendor=2001, idProduct=1a00 >> usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> usb 1-1.2: Product: DUB-E100 >> usb 1-1.2: Manufacturer: D-LINK CORPORAION >> usb 1-1.2: SerialNumber: 01 >> >> Then ifconfig: >> >> ifconfig eth0 192.168.0.1 >> eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000000 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001 >> >> Board is up but overflown with "Reloading ptd" messages and ping is not working. > You mean the "Reloading" message never disappears? > I have no clue what might be wrong here. The way the "reload" is handled > is probably wrong. This part of the code was my attempt to consider > Errata1 and it made my usb disk to work. Section "1.3 Workaround" in the > errata document describes two workarounds. > If the driver in blackfin's tree works, then you could try to see what > they do different but this might be difficult. > Yes, "Reloading" only stops when I unplug USB Ethernet device. Anyway thanks for direction! Regards, Ivan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
