Ivan Kuten wrote:
Hello,
Hello,
Then plug for example USB-to-Ethernet Adapter:
usb 1-1.2: new high speed USB device using isp1760-hcd and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
eth0: register 'asix' at usb-isp1760-hcd-1.2, DLink DUB-E100 USB Ethernet, 00:80:c8:37:9d:6c
usb 1-1.2: New USB device found, idVendor=2001, idProduct=1a00
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: DUB-E100
usb 1-1.2: Manufacturer: D-LINK CORPORAION
usb 1-1.2: SerialNumber: 01
Then ifconfig:
ifconfig eth0 192.168.0.1
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000000 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Reloading ptd 045417a0/04334160... qh 04236384 readed: 0 of 1514 done: 00000002 cur: 00000001
Board is up but overflown with "Reloading ptd" messages and ping is not working.
You mean the "Reloading" message never disappears?
I have no clue what might be wrong here. The way the "reload" is handled
is probably wrong. This part of the code was my attempt to consider
Errata1 and it made my usb disk to work. Section "1.3 Workaround" in the
errata document describes two workarounds.
If the driver in blackfin's tree works, then you could try to see what
they do different but this might be difficult.
Regards,
Ivan
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
