The new mux connection naming scheme is now in use, so
dropping the connections still using the old names. From now
on the same connection description named "mode-switch" is
used with both the port and the alternate modes, so on CHT
the DP alt mode will use the same connection as the port to
get a handle to the mux device.
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Reviewed-by: Jun Li <jun.li@xxxxxxx>
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/platform/x86/intel_cht_int33fe.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index 295fe19ad4c2..6fa3cced6f8e 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -32,7 +32,7 @@ struct cht_int33fe_data {
struct i2c_client *fusb302;
struct i2c_client *pi3usb30532;
/* Contain a list-head must be per device */
- struct device_connection connections[7];
+ struct device_connection connections[4];
};
/*
@@ -174,22 +174,13 @@ static int cht_int33fe_probe(struct platform_device *pdev)
data->connections[0].endpoint[0] = "port0";
data->connections[0].endpoint[1] = "i2c-pi3usb30532";
- data->connections[0].id = "typec-switch";
+ data->connections[0].id = "orientation-switch";
data->connections[1].endpoint[0] = "port0";
data->connections[1].endpoint[1] = "i2c-pi3usb30532";
- data->connections[1].id = "typec-mux";
- data->connections[2].endpoint[0] = "port0";
- data->connections[2].endpoint[1] = "i2c-pi3usb30532";
- data->connections[2].id = "idff01m01";
- data->connections[3].endpoint[0] = "i2c-fusb302";
- data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
- data->connections[3].id = "usb-role-switch";
- data->connections[4].endpoint[0] = "port0";
- data->connections[4].endpoint[1] = "i2c-pi3usb30532";
- data->connections[4].id = "orientation-switch";
- data->connections[5].endpoint[0] = "port0";
- data->connections[5].endpoint[1] = "i2c-pi3usb30532";
- data->connections[5].id = "mode-switch";
+ data->connections[1].id = "mode-switch";
+ data->connections[2].endpoint[0] = "i2c-fusb302";
+ data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
+ data->connections[2].id = "usb-role-switch";
device_connections_add(data->connections);
--
2.20.1
