Hi Gregory, Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> wrote on Fri, 18 Jan 2019 17:04:01 +0100: > Hi Miquel, > > On ven., janv. 11 2019, Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote: > > > From: Ofer Heifetz <oferh@xxxxxxxxxxx> > > > > The mvebu xHCI host driver does not have suspend/resume support. Use of > > the XHCI_RESET_ON_RESUME quirk is mandatory in order to avoid failures > > after resume. This will work only if no USB device is plugged-in. > > > > While at it, mention in the Kconfig file that this IP is also present > > on the A3700 SoC. > > > > Signed-off-by: Ofer Heifetz <oferh@xxxxxxxxxxx> > > [miquel.raynal@xxxxxxxxxxx: Reword the commit message] > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > > --- > > drivers/usb/host/Kconfig | 4 ++-- > > drivers/usb/host/xhci-mvebu.c | 11 +++++++++++ > > drivers/usb/host/xhci-mvebu.h | 6 ++++++ > > drivers/usb/host/xhci-plat.c | 7 +++++++ > > 4 files changed, 26 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > > index 16758b12a5e9..13d59be6a6aa 100644 > > --- a/drivers/usb/host/Kconfig > > +++ b/drivers/usb/host/Kconfig > > @@ -69,13 +69,13 @@ config USB_XHCI_MTK > > If unsure, say N. > > > > config USB_XHCI_MVEBU > > - tristate "xHCI support for Marvell Armada 375/38x" > > + tristate "xHCI support for Marvell Armada 375/38x/3700" > > I would name it 37xx to be consistent with 38x > > > select USB_XHCI_PLATFORM > > depends on HAS_IOMEM > > depends on ARCH_MVEBU || COMPILE_TEST > > ---help--- > > Say 'Y' to enable the support for the xHCI host controller > > - found in Marvell Armada 375/38x ARM SOCs. > > + found in Marvell Armada 375/38x/3700 ARM SOCs. > same here > Sure! Thanks, Miquèl
