Hello, As part of an effort to bring suspend to RAM support to Armada 3700 SoCs (main target: ESPRESSObin), this series handles the work around the USB2 and USB32 IPs. First, a change in the core adds support for the new PHY framework by following the phy_set_mode()/phy_power_on() sequence (patch 1). The second change needed is to update the xHCI MVEBU driver (patch 2) with the XHCI_RESET_ON_RESUME quirk that will do most of the reconfiguration work when resuming. Then, because of the asynchronous suspend feature implemented lately, the xHCI driver was blocking during the S2RAM operation, probably due to a register access while the clock was not enabled. A first patch has been written for that, adding a new quirk to ignore the asynchronous setting [1] which has become useless once clock links with consumer have been contributed [2] (series not merged yet). Then, the OHCI Orion (USB2 host controller) driver is updated to avoid doing twice the PHY management (patch 3) and upgraded with traditional S2RAM callbacks (patch 4). The last missing peace is a UTMI PHY driver for the USB2 part of each controller, which is added in patch 5 (see patch 6 for the bindings). Finally, the A3700 device tree is updated (patch 7, 8, 9) to reference the PHYs. xHCI bindings already document the PHY so no update is needed on this regard. [1] http://code.bulix.org/s2ccd4-511198 [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2019-January/623885.html Thanks, Miquèl Changes since v1: ================= * Add UTMI PHY driver/bindings/DT changes to bring S2RAM support to both USB ports available on the A3700 SoC. * Updates to the OHCI Orion driver to avoid doing the PHY initialization twice. * Upgrade of the OHCI Orion driver with S2RAM callbacks. * Added a reference to the A3700 SoC in the USB Host Kconfig prompt (not only in the help section). * Rebased on top of v5.0-rc1. Miquel Raynal (9): usb: core: comply to PHY framework usb: ehci-orion: avoid double PHY initialization usb: ehci-orion: add S2RAM support phy: add A3700 UTMI PHY driver dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings MAINTAINERS: phy: fill Armada 3700 PHY drivers entry ARM64: dts: marvell: armada-37xx: fix USB2 memory region ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs Ofer Heifetz (1): usb: host: xhci: mvebu: add reset on resume quirk .../bindings/phy/phy-mvebu-utmi.txt | 37 +++ MAINTAINERS | 4 +- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 32 +- drivers/phy/marvell/Kconfig | 9 + drivers/phy/marvell/Makefile | 1 + drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 297 ++++++++++++++++++ drivers/usb/core/hcd.c | 5 + drivers/usb/core/phy.c | 28 ++ drivers/usb/core/phy.h | 2 + drivers/usb/host/Kconfig | 4 +- drivers/usb/host/ehci-orion.c | 51 +-- drivers/usb/host/xhci-mvebu.c | 11 + drivers/usb/host/xhci-mvebu.h | 6 + drivers/usb/host/xhci-plat.c | 7 + 14 files changed, 467 insertions(+), 27 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-utmi.c -- 2.19.1
