No need to initialize the PHY from the driver's probe. It is done by
the core automatically and doing it twice would increment the
phy->powercount counter to 2 instead of 1. During later suspend
operation, the counter will be decremented to one, no phy->power_off()
will occur and worst than that, the following phy->power_on() at
resume time will be also skipped, failing the whole S2RAM operation.
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/usb/host/ehci-orion.c | 26 +++-----------------------
1 file changed, 3 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 1ad72647a069..3109f082949e 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -257,15 +257,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
if (IS_ERR(priv->phy)) {
err = PTR_ERR(priv->phy);
if (err != -ENOSYS)
- goto err_phy_get;
- } else {
- err = phy_init(priv->phy);
- if (err)
- goto err_phy_init;
-
- err = phy_power_on(priv->phy);
- if (err)
- goto err_phy_power_on;
+ goto err_dis_clk;
}
/*
@@ -297,19 +289,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
- goto err_add_hcd;
+ goto err_dis_clk;
device_wakeup_enable(hcd->self.controller);
return 0;
-err_add_hcd:
- if (!IS_ERR(priv->phy))
- phy_power_off(priv->phy);
-err_phy_power_on:
- if (!IS_ERR(priv->phy))
- phy_exit(priv->phy);
-err_phy_init:
-err_phy_get:
+err_dis_clk:
if (!IS_ERR(priv->clk))
clk_disable_unprepare(priv->clk);
usb_put_hcd(hcd);
@@ -327,11 +312,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
- if (!IS_ERR(priv->phy)) {
- phy_power_off(priv->phy);
- phy_exit(priv->phy);
- }
-
if (!IS_ERR(priv->clk))
clk_disable_unprepare(priv->clk);
--
2.19.1
