Re: [PATCH v1 2/6] clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/9/2019 11:59 AM, Stephen Boyd wrote:
Quoting Jeffrey Hugo (2019-01-04 08:50:15)
The gcc_usb3_phy_pipe_clk is generated by the phy, but is also used by
the phy during init.  The clock needs to be enabled during the init
sequence, but may not be fully active until after the init sequence is
complete.  This causes a catch-22 if the clock status is checked during
enable.  As a result, skip the checks to avoid the troubling situation.

I will ask again, is anyone going to fix this in the phy driver? In
theory it isn't needed if the phy driver can do things differently, but
last time I checked I was told that the phy team said it had to be done
this way.


Interesting. I was unaware of past discussion(s) on this. Thank you for taking the change, but I'll try having a look to see if maybe I can prove your theory going forward.

--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux