Re: [PATCH v1 2/6] clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Jeffrey Hugo (2019-01-04 08:50:15)
> The gcc_usb3_phy_pipe_clk is generated by the phy, but is also used by
> the phy during init.  The clock needs to be enabled during the init
> sequence, but may not be fully active until after the init sequence is
> complete.  This causes a catch-22 if the clock status is checked during
> enable.  As a result, skip the checks to avoid the troubling situation.

I will ask again, is anyone going to fix this in the phy driver? In
theory it isn't needed if the phy driver can do things differently, but
last time I checked I was told that the phy team said it had to be done
this way.





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux