Add new PID to support PL2303TB (TYPE_HX)
Add new PID to support PL2303(N)GC/GB/GS/GT/GL/GE (TYPE_HXN)
Add new Flow Control to support PL2303(N)GC/GB/GS/GT/GL/GE (TYPE_HXN)
Add new Pull-Up Mode to support PL2303HXD (TYPE_HX)
Fixed warning:restricted__le16 degrades to integer
Signed-off-by: Charles Yeh <charlesyeh522@xxxxxxxxx>
---
drivers/usb/serial/pl2303.c | 116 +++++++++++++++++++++++++++++-------
drivers/usb/serial/pl2303.h | 11 ++++
2 files changed, 106 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index a4e0d13fc121..8c71612e1811 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -46,6 +46,13 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303G_PRODUCT_ID_GC) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303G_PRODUCT_ID_GB) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303G_PRODUCT_ID_GT) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303G_PRODUCT_ID_GL) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303G_PRODUCT_ID_GE) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303G_PRODUCT_ID_GS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
@@ -123,9 +130,11 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define VENDOR_WRITE_REQUEST_TYPE 0x40
#define VENDOR_WRITE_REQUEST 0x01
+#define VENDOR_WRITE_NREQUEST 0x80
#define VENDOR_READ_REQUEST_TYPE 0xc0
#define VENDOR_READ_REQUEST 0x01
+#define VENDOR_READ_NREQUEST 0x81
#define UART_STATE_INDEX 8
#define UART_STATE_MSR_MASK 0x8b
@@ -139,11 +148,21 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
+#define TYPE_HX_READ_OTP_STATUS_REGISTER 0x8484
+#define TYPE_HX_EXTERNAL_PULLUP_MODE 0x08
+#define TYPE_HX_PULLUP_MODE_REG 0x09
+#define TYPE_HXN_UART_FLOWCONTROL 0x0A
+#define TYPE_HXN_HARDWAREFLOW 0xFA
+#define TYPE_HXN_SOFTWAREFLOW 0xEE
+#define TYPE_HXN_NOFLOW 0xFF
+#define TYPE_HXN_RESET_DOWN_UPSTREAM 0x07
+
static void pl2303_set_break(struct usb_serial_port *port, bool enable);
enum pl2303_type {
TYPE_01, /* Type 0 and 1 (difference unknown) */
TYPE_HX, /* HX version of the pl2303 chip */
+ TYPE_HXN, /* HXN version of the pl2303 chip */
TYPE_COUNT
};
@@ -173,16 +192,26 @@ static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
[TYPE_HX] = {
.max_baud_rate = 12000000,
},
+ [TYPE_HXN] = {
+ .max_baud_rate = 12000000,
+ },
};
static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
unsigned char buf[1])
{
struct device *dev = &serial->interface->dev;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int res;
+ u8 request;
+
+ if (spriv->type == &pl2303_type_data[TYPE_HXN])
+ request = VENDOR_READ_NREQUEST;
+ else
+ request = VENDOR_READ_REQUEST;
res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
+ request, VENDOR_READ_REQUEST_TYPE,
value, 0, buf, 1, 100);
if (res != 1) {
dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__,
@@ -201,12 +230,19 @@ static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
{
struct device *dev = &serial->interface->dev;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int res;
+ u8 request;
dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index);
+ if (spriv->type == &pl2303_type_data[TYPE_HXN])
+ request = VENDOR_WRITE_NREQUEST;
+ else
+ request = VENDOR_WRITE_REQUEST;
+
res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
+ request, VENDOR_WRITE_REQUEST_TYPE,
value, index, NULL, 0, 100);
if (res) {
dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__,
@@ -286,6 +322,7 @@ static int pl2303_startup(struct usb_serial *serial)
struct pl2303_serial_private *spriv;
enum pl2303_type type = TYPE_01;
unsigned char *buf;
+ int res;
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
@@ -307,26 +344,36 @@ static int pl2303_startup(struct usb_serial *serial)
type = TYPE_01; /* type 1 */
dev_dbg(&serial->interface->dev, "device type: %d\n", type);
+ if (type == TYPE_HX) {
+ res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
+ TYPE_HX_READ_OTP_STATUS_REGISTER, 0, buf, 1, 100);
+ if (res != 1)
+ type = TYPE_HXN;
+ }
+
spriv->type = &pl2303_type_data[type];
spriv->quirks = (unsigned long)usb_get_serial_data(serial);
spriv->quirks |= spriv->type->quirks;
usb_set_serial_data(serial, spriv);
- pl2303_vendor_read(serial, 0x8484, buf);
- pl2303_vendor_write(serial, 0x0404, 0);
- pl2303_vendor_read(serial, 0x8484, buf);
- pl2303_vendor_read(serial, 0x8383, buf);
- pl2303_vendor_read(serial, 0x8484, buf);
- pl2303_vendor_write(serial, 0x0404, 1);
- pl2303_vendor_read(serial, 0x8484, buf);
- pl2303_vendor_read(serial, 0x8383, buf);
- pl2303_vendor_write(serial, 0, 1);
- pl2303_vendor_write(serial, 1, 0);
- if (spriv->quirks & PL2303_QUIRK_LEGACY)
- pl2303_vendor_write(serial, 2, 0x24);
- else
- pl2303_vendor_write(serial, 2, 0x44);
+ if (type != TYPE_HXN) {
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_write(serial, 0x0404, 0);
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_read(serial, 0x8383, buf);
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_write(serial, 0x0404, 1);
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_read(serial, 0x8383, buf);
+ pl2303_vendor_write(serial, 0, 1);
+ pl2303_vendor_write(serial, 1, 0);
+ if (spriv->quirks & PL2303_QUIRK_LEGACY)
+ pl2303_vendor_write(serial, 2, 0x24);
+ else
+ pl2303_vendor_write(serial, 2, 0x44);
+ }
kfree(buf);
@@ -671,15 +718,37 @@ static void pl2303_set_termios(struct tty_struct *tty,
}
if (C_CRTSCTS(tty)) {
- if (spriv->quirks & PL2303_QUIRK_LEGACY)
+ if (spriv->type == &pl2303_type_data[TYPE_01])
pl2303_vendor_write(serial, 0x0, 0x41);
+ else if (spriv->type == &pl2303_type_data[TYPE_HXN])
+ pl2303_vendor_write(serial, TYPE_HXN_UART_FLOWCONTROL,
+ TYPE_HXN_HARDWAREFLOW);
else
pl2303_vendor_write(serial, 0x0, 0x61);
} else if (I_IXON(tty) && !I_IXANY(tty) && START_CHAR(tty) == 0x11 &&
STOP_CHAR(tty) == 0x13) {
- pl2303_vendor_write(serial, 0x0, 0xc0);
+ if (spriv->type == &pl2303_type_data[TYPE_HXN])
+ pl2303_vendor_write(serial, TYPE_HXN_UART_FLOWCONTROL,
+ TYPE_HXN_SOFTWAREFLOW);
+ else
+ pl2303_vendor_write(serial, 0x0, 0xc0);
} else {
- pl2303_vendor_write(serial, 0x0, 0x0);
+ if (spriv->type == &pl2303_type_data[TYPE_HXN])
+ pl2303_vendor_write(serial, TYPE_HXN_UART_FLOWCONTROL,
+ TYPE_HXN_NOFLOW);
+ else
+ pl2303_vendor_write(serial, 0x0, 0x0);
+ }
+
+ if (spriv->type == &pl2303_type_data[TYPE_HX]) {
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_write(serial, 0x0404, TYPE_HX_PULLUP_MODE_REG);
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_read(serial, 0x8383, buf);
+ if ((u16)*buf & TYPE_HX_EXTERNAL_PULLUP_MODE) {
+ pl2303_vendor_write(serial, 0x0, 0x31);
+ pl2303_vendor_write(serial, 0x1, 0x01);
+ }
}
kfree(buf);
@@ -720,8 +789,13 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
/* reset upstream data pipes */
- pl2303_vendor_write(serial, 8, 0);
- pl2303_vendor_write(serial, 9, 0);
+ if (spriv->type == &pl2303_type_data[TYPE_HXN])
+ pl2303_vendor_write(serial,
+ TYPE_HXN_RESET_DOWN_UPSTREAM, 0);
+ else {
+ pl2303_vendor_write(serial, 8, 0);
+ pl2303_vendor_write(serial, 9, 0);
+ }
}
/* Setup termios */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 26965cc23c17..f7c500622f6b 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -20,6 +20,17 @@
#define PL2303_PRODUCT_ID_MOTOROLA 0x0307
#define PL2303_PRODUCT_ID_ZTEK 0xe1f1
+/* PL2303TB , TYPE_HX */
+#define PL2303_PRODUCT_ID_TB 0x2304
+
+/* PL2303HXN , TYPE_HXN */
+#define PL2303G_PRODUCT_ID_GC 0x23A3
+#define PL2303G_PRODUCT_ID_GB 0x23B3
+#define PL2303G_PRODUCT_ID_GT 0x23C3
+#define PL2303G_PRODUCT_ID_GL 0x23D3
+#define PL2303G_PRODUCT_ID_GE 0x23E3
+#define PL2303G_PRODUCT_ID_GS 0x23F3
+
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
#define ATEN_PRODUCT_ID 0x2008
--
2.19.1
