RE: [RFC PATCH v2 08/15] usb:cdns3: Implements device operations part of the API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

>> Patch adds implementation callback function defined in
>> usb_gadget_ops object.
>>
>> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>> ---
>>  drivers/usb/cdns3/gadget.c | 249 ++++++++++++++++++++++++++++++++++++-
>>  1 file changed, 247 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
>> index 376b68b13d1b..702a05faa664 100644
>> --- a/drivers/usb/cdns3/gadget.c
>> +++ b/drivers/usb/cdns3/gadget.c
>> @@ -17,6 +17,36 @@
>>  #include "gadget-export.h"
>>  #include "gadget.h"
>>
>> +/**
>> + * cdns3_handshake - spin reading  until handshake completes or fails
>> + * @ptr: address of device controller register to be read
>> + * @mask: bits to look at in result of read
>> + * @done: value of those bits when handshake succeeds
>> + * @usec: timeout in microseconds
>> + *
>> + * Returns negative errno, or zero on success
>> + *
>> + * Success happens when the "mask" bits have the specified value (hardware
>> + * handshake done). There are two failure modes: "usec" have passed (major
>> + * hardware flakeout), or the register reads as all-ones (hardware removed).
>> + */
>> +int cdns3_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
>> +{
>> +	u32	result;
>> +
>> +	do {
>> +		result = readl(ptr);
>> +		if (result == ~(u32)0)	/* card removed */
>> +			return -ENODEV;
>
>Is this applicable to all registers?
>What is meant by card removed? We're not connected to host?
>
>how does EP reset behave when there is no USB connection?
>

Function was adopted from XHCI driver (xhci_handshake). 
I think it's about PCI card.  If this happens driver should read 0xffffffff from any register. 
I need to confirm it with hardware team or test it. 
I remember that I had such situation some time ago. 
My testing platform consist of separate FPGA  board and PC. Both has  PCI adapter 
and are connected by means of special PCI cable.

>> +		result &= mask;
>> +		if (result == done)
>> +			return 0;
>> +		udelay(1);
>> +		usec--;
>> +	} while (usec > 0);
>> +	return -ETIMEDOUT;
>> +}
>> +
>>  /**
>>   * cdns3_set_register_bit - set bit in given register.
>>   * @ptr: address of device controller register to be read and changed
>> @@ -43,6 +73,25 @@ void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
>>  	writel(ep, &priv_dev->regs->ep_sel);
>>  }
>>
>> +static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep)
>> +{
>> +	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
>> +
>> +	if (priv_ep->trb_pool) {
>> +		dma_free_coherent(priv_dev->sysdev,
>> +				  TRB_RIGN_SIZE,
>> +				  priv_ep->trb_pool, priv_ep->trb_pool_dma);
>> +		priv_ep->trb_pool = NULL;
>> +	}
>> +
>> +	if (priv_ep->aligned_buff) {
>> +		dma_free_coherent(priv_dev->sysdev, CDNS3_UNALIGNED_BUF_SIZE,
>> +				  priv_ep->aligned_buff,
>> +				  priv_ep->aligned_dma_addr);
>> +		priv_ep->aligned_buff = NULL;
>> +	}
>> +}
>> +
>>  /**
>>   * cdns3_irq_handler - irq line interrupt handler
>>   * @cdns: cdns3 instance
>> @@ -58,6 +107,114 @@ static irqreturn_t cdns3_irq_handler_thread(struct cdns3 *cdns)
>>  	return ret;
>>  }
>>
>> +/* Find correct direction for HW endpoint according to description */
>> +static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc,
>> +				   struct cdns3_endpoint *priv_ep)
>> +{
>> +	return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) ||
>> +	       (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc));
>> +}
>> +
>> +static struct cdns3_endpoint *cdns3_find_available_ss_ep(struct cdns3_device *priv_dev,
>> +							 struct usb_endpoint_descriptor *desc)
>
>why is this function called ss_ep? This doesn't seem like only for superspeed endpoints.

I will remove _ss_. 
>
>> +{
>> +	struct usb_ep *ep;
>> +	struct cdns3_endpoint *priv_ep;
>> +
>> +	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
>> +		unsigned long num;
>> +		int ret;
>> +		/* ep name pattern likes epXin or epXout */
>> +		char c[2] = {ep->name[2], '\0'};
>> +
>> +		ret = kstrtoul(c, 10, &num);
>> +		if (ret)
>> +			return ERR_PTR(ret);
>> +
>> +		priv_ep = ep_to_cdns3_ep(ep);
>> +		if (cdns3_ep_dir_is_correct(desc, priv_ep)) {
>> +			if (!(priv_ep->flags & EP_USED)) {
>> +				priv_ep->num  = num;
>> +				priv_ep->flags |= EP_USED;
>> +				return priv_ep;
>> +			}
>> +		}
>> +	}
>> +	return ERR_PTR(-ENOENT);
>> +}
>> +
>> +static struct usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
>> +					    struct usb_endpoint_descriptor *desc,
>> +					    struct usb_ss_ep_comp_descriptor *comp_desc)
>> +{
>> +	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
>> +	struct cdns3_endpoint *priv_ep;
>> +	unsigned long flags;
>> +
>> +	priv_ep = cdns3_find_available_ss_ep(priv_dev, desc);
>> +	if (IS_ERR(priv_ep)) {
>> +		dev_err(&priv_dev->dev, "no available ep\n");
>> +		return NULL;
>> +	}
>> +
>> +	dev_dbg(&priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
>> +
>> +	spin_lock_irqsave(&priv_dev->lock, flags);
>> +	priv_ep->endpoint.desc = desc;
>> +	priv_ep->dir  = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
>> +	priv_ep->type = usb_endpoint_type(desc);
>> +
>> +	list_add_tail(&priv_ep->ep_match_pending_list,
>> +		      &priv_dev->ep_match_list);
>> +	spin_unlock_irqrestore(&priv_dev->lock, flags);
>> +	return &priv_ep->endpoint;
>> +}
>
>Why do you need a custom match_ep?
>doesn't usb_ep_autoconfig suffice?

I need to test it but at first glance it  looks like usb_ep_autoconfig suffice.

>
>You can check if EP is claimed or not by checking the ep->claimed flag.
>
>> +
>> +/**
>> + * cdns3_gadget_get_frame Returns number of actual ITP frame
>> + * @gadget: gadget object
>> + *
>> + * Returns number of actual ITP frame
>> + */
>> +static int cdns3_gadget_get_frame(struct usb_gadget *gadget)
>> +{
>> +	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
>> +
>> +	return readl(&priv_dev->regs->usb_iptn);
>> +}
>> +
>> +static int cdns3_gadget_wakeup(struct usb_gadget *gadget)
>> +{
>> +	return 0;
>> +}
>> +
>> +static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget,
>> +					int is_selfpowered)
>> +{
>> +	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
>> +	unsigned long flags;
>> +
>> +	spin_lock_irqsave(&priv_dev->lock, flags);
>> +	gadget->is_selfpowered = !!is_selfpowered;
>> +	spin_unlock_irqrestore(&priv_dev->lock, flags);
>> +	return 0;
>> +}
>> +
>> +static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
>> +{
>> +	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
>> +
>> +	if (!priv_dev->start_gadget)
>> +		return 0;
>> +
>> +	if (is_on)
>> +		writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
>> +	else
>> +		writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
>> +
>> +	return 0;
>> +}
>> +
>>  static void cdns3_gadget_config(struct cdns3_device *priv_dev)
>>  {
>>  	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
>> @@ -74,6 +231,95 @@ static void cdns3_gadget_config(struct cdns3_device *priv_dev)
>>  	writel(USB_CONF_DEVEN, &regs->usb_conf);
>>  }
>>
>> +/**
>> + * cdns3_gadget_udc_start Gadget start
>> + * @gadget: gadget object
>> + * @driver: driver which operates on this gadget
>> + *
>> + * Returns 0 on success, error code elsewhere
>> + */
>> +static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
>> +				  struct usb_gadget_driver *driver)
>> +{
>> +	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
>> +	unsigned long flags;
>> +
>> +	if (priv_dev->gadget_driver) {
>> +		dev_err(&priv_dev->dev, "%s is already bound to %s\n",
>> +			priv_dev->gadget.name,
>> +			priv_dev->gadget_driver->driver.name);
>> +		return -EBUSY;
>> +	}
>
>Not sure if this check is required. UDC core should be doing that.
>
>> +
>> +	spin_lock_irqsave(&priv_dev->lock, flags);
>> +	priv_dev->gadget_driver = driver;
>> +	if (!priv_dev->start_gadget)
>> +		goto unlock;
>> +
>> +	cdns3_gadget_config(priv_dev);
>> +unlock:
>> +	spin_unlock_irqrestore(&priv_dev->lock, flags);
>> +	return 0;
>> +}
>> +
>> +/**
>> + * cdns3_gadget_udc_stop Stops gadget
>> + * @gadget: gadget object
>> + *
>> + * Returns 0
>> + */
>> +static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
>> +{
>> +	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
>> +	struct cdns3_endpoint *priv_ep, *temp_ep;
>> +	u32 bEndpointAddress;
>> +	struct usb_ep *ep;
>> +	int ret = 0;
>> +	int i;
>> +
>> +	priv_dev->gadget_driver = NULL;
>> +	list_for_each_entry_safe(priv_ep, temp_ep, &priv_dev->ep_match_list,
>> +				 ep_match_pending_list) {
>> +		list_del(&priv_ep->ep_match_pending_list);
>> +		priv_ep->flags &= ~EP_USED;
>> +	}
>> +
>> +	priv_dev->onchip_mem_allocated_size = 0;
>> +	priv_dev->out_mem_is_allocated = 0;
>> +	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
>> +
>> +	for (i = 0; i < priv_dev->ep_nums ; i++)
>> +		cdns3_free_trb_pool(priv_dev->eps[i]);
>> +
>> +	if (!priv_dev->start_gadget)
>> +		return 0;
>
>This looks tricky. Why do we need this flag?

It will be removed in next version. It's no longer needed. 
>
>> +
>> +	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
>> +		priv_ep = ep_to_cdns3_ep(ep);
>> +		bEndpointAddress = priv_ep->num | priv_ep->dir;
>> +		cdns3_select_ep(priv_dev, bEndpointAddress);
>> +		writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
>> +		ret = cdns3_handshake(&priv_dev->regs->ep_cmd,
>> +				      EP_CMD_EPRST, 0, 100);
>> +	}
>> +
>> +	/* disable interrupt for device */
>> +	writel(0, &priv_dev->regs->usb_ien);
>> +	writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
>
>where are you requesting the interrupt? Looks like it should be done in
>udc_start() no?

Currently it is in initialization when the role is switched on. Interrupt is freeing 
during switching off role. So now the concept is the same as for host role. 
Whole device part is loaded and unloaded during changing role.. 
>
>> +
>> +	return ret;
>> +}
>
>Can we combine cdns3_gadget_udc_start() and cdns3_gadget_udc_start()
>with cdns3_gadget_start() and cdns3_gadget_stop() respectively so that
>cdns3_gadget_config() and cleanup() is done at one place.
>

Ok, probably it can be invoked only in cdns3_gadget_udc_start() and 
cdns3_gadget_udc_start(), but I have to test it. 
>> +
>> +static const struct usb_gadget_ops cdns3_gadget_ops = {
>> +	.get_frame = cdns3_gadget_get_frame,
>> +	.wakeup = cdns3_gadget_wakeup,
>> +	.set_selfpowered = cdns3_gadget_set_selfpowered,
>> +	.pullup = cdns3_gadget_pullup,
>> +	.udc_start = cdns3_gadget_udc_start,
>> +	.udc_stop = cdns3_gadget_udc_stop,
>> +	.match_ep = cdns3_gadget_match_ep,
>> +};
>> +
>>  /**
>>   * cdns3_init_ep Initializes software endpoints of gadget
>>   * @cdns3: extended gadget object
>> @@ -184,8 +430,7 @@ static int __cdns3_gadget_init(struct cdns3 *cdns)
>>  	/* fill gadget fields */
>>  	priv_dev->gadget.max_speed = USB_SPEED_SUPER;
>>  	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
>> -	//TODO: Add implementation of cdns3_gadget_ops
>> -	//priv_dev->gadget.ops = &cdns3_gadget_ops;
>> +	priv_dev->gadget.ops = &cdns3_gadget_ops;
>>  	priv_dev->gadget.name = "usb-ss-gadget";
>>  	priv_dev->gadget.sg_supported = 1;
>>  	priv_dev->is_connected = 0;
>>
>
Cheers
Pawel




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux