Thanks! On Thu, Nov 29, 2018 at 2:26 PM Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> wrote: > > hi Hsin-Yi, > > On Thu, 2018-11-29 at 11:16 +0800, Hsin-Yi, Wang wrote: > > Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip, > > so host ip sleep will fail at ssusb_host_disable. > > > > Power down device ip at ssusb_host_setup. > > > > Signed-off-by: Hsin-Yi, Wang <hsinyi@xxxxxxxxxxxx> > > --- > > ChangeLog: > > V3->V4: > > *update comment > > --- > > drivers/usb/mtu3/mtu3_plat.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c > > index 46551f6d16fd..e086630e41a9 100644 > > --- a/drivers/usb/mtu3/mtu3_plat.c > > +++ b/drivers/usb/mtu3/mtu3_plat.c > > @@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb) > > mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); > > udelay(1); > > mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); > > + > > + /* > > + * device ip may be powered on in firmware/BROM stage before entering > > + * kernel stage; > > + * power down device ip, otherwise ip-sleep will fail when working as > > + * host only mode > > + */ > > + mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); > > } > > > > /* ignore the error if the clock does not exist */ > > Acked-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > > Thanks a lot > > >
